Question about Kenmore 62602 Electric Dryer
Air is coming out forcefull, but is not heating up
Hello Friend, Your problem is very simple to fix. You're dryer needs a thermal fuse and or gas valve coils, both are very simple and affordable to replace. To replace the thermal fuse just remove back cover of dryer and look down where the air blows out. Now, just to the left where all the wires are you will see a white plastic part with two wires plugged into it. This part is called a thermal fuse. Just remove these wires and replace the thermal fuse. Now, if this don't solve the problem you will need a gas valve coil kit. To replace coils just remove front of dryer body and look below drum you will see the gas valve. The valve coils are located on top of valve (two little round black cylinders). It's simple, just remove the two screws from the little metal bracket that holds them down, unplug the wires from them and just lift them straight up off of the valve. Take notice that one has 3 wires and one has 2 wires. Just replace with new coils and plug wires back in and re-fasten metal bracket. Your dryer will run like new. Happy to help, Tim.
Posted on Jun 24, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Aug 28, 2013 | Dryers
Aug 05, 2010 | Kenmore Dryers
Aug 04, 2010 | Whirlpool LGR3624JQ Gas Dryer
Aug 01, 2010 | Kenmore 400 6943 Dryer
Jun 14, 2010 | Dryers
May 20, 2010 | Kenmore 800 7982 Dryer
May 19, 2010 | Dryers
May 11, 2010 | Dryers
May 06, 2010 | Dryers
May 03, 2010 | Kenmore 64942 Electric Dryer
719 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: