Question about Frigidaire ATF6000ES Front Load Washer

1 Answer

Code F43 on frigidaire front load washer.

Not spinning during the spin cycle, ran through diagnostic mode and everything works but during the spin portion of the test it spins but starts beeping and giving F43 error code. Replaced the control board like the frigidaire manual said to and its still doing the same thing and giving the same code. Model # is LTF2140ES1

Posted by on

  • Anonymous Mar 14, 2014

    Frigidaire model fphb2899lf4 has error code "communication error" after replacing a defective power board

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 212 Answers

Motor control possibly bad

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GLTF2940ES3 - Frigidaire Front load washing machine e59 error code


http://www.ehow.com/info_12127418_frigidaire-gltf2940fs1-not-spin-error-e59.html

May 02, 2014 | Frigidaire GLTF2940ES Front Load Washer

2 Answers

How to Troubleshoot a Frigidaire Front Load Washer That Doesn't Spin Read more: How to Troubleshoot a Frigidaire Front Load Washer That Doesn't Spin | eHow.com http://www.ehow.com/how_6496482


Hello - Does the unit make a humming noise? If so, either the drainage hose/pump is clogged and needs to be cleaned, or you have another issue with the door lock assembly or the timer and control board not communicating correctly. Contact a professional to move forward accurately.

Oct 21, 2012 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

Wfc7500vw spins but not at high speed on final spin


This is a common problem with the Whirlpool front load machine. The motor control board goes out but the new ones have been redesigned. You will need to replace the control board. Here is a link to the control board you need.

Oct 17, 2012 | Whirlpool WFC7500VW Washer

1 Answer

Whirlpool Front Loading Washer Only Spins in Diagnostic Mode


replace the brushes in the motor _around 20 quid and usually the first thing to start messing up when the brushes get short is the fast spin _UNPLUG IT FIRST. you might also like to clean up the com with a bit of wet and dry

Oct 02, 2012 | Whirlpool Washing Machines

1 Answer

ATF6000ES front load washer won't spin during regular cycle.


clogged filter will cause this error code. I have the same washer and the filter located inside the rubber boot attached to the pump was full of junk. there was enough room for water to get thru but not enough for full volume. clean it out and it should work. note : its a pain to get the boot back on so be ready and take it slow. this worked for me.

Aug 27, 2009 | Frigidaire ATF6000ES Front Load Washer

5 Answers

Frigidaire front load washer won't final spin


THERE ARE A COUPLE OF CONDITIONS THAT WILL PREVENT THIS UNIT FROM SPINNING :NOT COMPLETELY DRAIN AND FAULTY DOOR LOCK AS SY.
FIRST REMOVE ELBOW ADAPTER HOSE FROM TUB TO PUMP AND MAKE SURE IS COMPLETELY CLEAN ,HOSE STRAINER THEN CHECK IMPELLER @ DRAIN PUMP NOT TO BE BROOKED , DEFORMED .DIRTY OR LOOSE IF IS LIKE THIS REPLACE PUMP IF NOT PUT EVERYTHING BACK TOGETHER ,MAKING SURE THE STRAINER IS ALL WAY DOWN (IF IT HAS ONE) IF NOT IT WILL GET LOOSE AND DAMAGE YOUR OUTHER TUB ,THEN THIS IS IT .
THEN CHECK PRESSURE SW HOSE FOR LEAKS AND BLOW SLOWLY AND CAREFULLY TO CHECK PRESSURE SW .IF CHECKS OK THEN REPLACE DOOR SW ASSY AND RUN ONE IM VERY SURE THIS WILL TAKE CARE OF YOUR SITUATION ;NOW GET ON YOUR KNEES , GET DIRTY AND HAVE A GREAT DAY!

MAYITOJHONES

Nov 09, 2008 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Very noisy during spin cycle


You probably need new shocks for the washer as they break over time. They cost $37 each and you can replace them your self. If you don't fix these you may end up breaking the motor controller and while the part may be covered under the warranty the diagnostic and labor is not.

Nov 03, 2008 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Frigidaire front load washing machine gtlf490e


just change the door switch been there done that have the t shirt

Sep 07, 2008 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

14 cycle front load washer fridgidaire


press cancel. (turns off washer)
press start/pause (wake up)
hold cancel and start/pause 10sec

last error code will come up.

E47 door lock error

check wires connections to the door lock..

replace door lock..

hope it helps

Aug 08, 2008 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Washes fine will not spin


your brushes are gone you will have to wright down your model number and look on ebay there really cheap

Jan 05, 2008 | Frigidaire ATF6000ES Front Load Washer

Not finding what you are looking for?
Frigidaire ATF6000ES Front Load Washer Logo

Related Topics:

1,195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1461 Answers

Jason Harris
Jason Harris

Level 2 Expert

264 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...