Question about ECS PN2-SLI2+ (V1.0) Motherboard

1 Answer

C1 led post code

Hello, I just bought the ECS PN2-SLI2+ Motherboard and when I boot the computer, nothing appears on my screen, just a beep every 5 seconds with the code C1 on the LED POST Codes. The fans are working, my DVD burner opens but that's it. I have no idea what to do and the manual doens't have any kind of troubleshoot.
Please Help.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 4,889 Answers
Re: C1 led post code

Its a problem with you RAM..I guess you are using two rams of different frequencies...This leads to a mismatch and continuous beeping..If you have only one RAM make sure it is seated properly..
Report to what happened..

Posted on Nov 02, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

CES GF 7050 can't boot

Hello here is the homepage:

I think your harddrive is failing.
Try to borrow a harddrive from a friend, just to find out of the mainboard is failing.

The power supply, could have a fault, try to renew that.
But one of the ram modules, could also have a fault.
Try to boot with only one module.

Look aslo at this page here:

Any beeps at startup ?

Here is a list of beepcodes:

Best of luck :-)

Jan 31, 2013 | ECS Mcp73t-m5 Gf7050-m5 Motherboard Nvidia...

1 Answer

During boot-up im not getting any responce from my monitor. any help most apreciated

Hello here is the homepage:

Here is a check guide:

Most problem is a faulty power supply, or a fault in ram or mainboard or the graphic card failing.

Check the monitor on another pc, and also the cable connection.

Any beep codes when start up ??

Good luck

Jan 09, 2013 | EliteGroup ECS A740GM-M Motherboard -...

1 Answer

Nothing coming up on the monitor

This is very difficult to troubleshoot because there are too many unknowns.
Does the mobo have diagnostic LEDs? The changes in indicators would indicate the boot up activity is taking place. If you have no visual indicators, then
You might have to get a boot up code display. This is a device that connects to the bus (via pci / pcie slot in most cases) and has a digital readout. When the mobo stops on a certain code, you will have to lookup the code to determine where it's getting stuck.
If you have no access to a diagnostic card, then some of the other very "elementary" things you can do are:
Listen for the beep code. If the speaker doesn't beep at all, then your CPU is likely not running the POST test. Check your power on LED. Check your HDD LED to see if any disk activity (hdd detection) takes place.
Other than that, you're SOL without some equipment.
Good luck!

Jun 06, 2010 | Tyan Tiger MPX S2466N-4M Motherboard

1 Answer

Help (post code 21) on a 680i motherboard

Your memory isn't on the quaLIFIED vendors list but this board is trouble according to the 1000's of people requesting RMA's. ANSWER new memory or new motherboard+

Dec 13, 2009 | ECS PN2-SLI2+ (V1.0) Motherboard

3 Answers

Intel D815EEA: Won't Boot / Blank Screen / Three Beeps

3 short beeps means Base 64K RAM failure.

try to replace the RAM.

Jun 24, 2009 | Intel Desktop Board D815EEA2 (BOX815EEAA2)...

1 Answer

Driver cd

hello friend.. download the software DRIVER DETECTIVE.....

after you install it..

the DRIVER DETECTIVE can found all driver on your motherboard,..

after you got the driver name...

you can download this driver from.

good luck..


Apr 17, 2008 | ECS PN2-SLI2+ (V1.0) Motherboard

2 Answers

Presario SR1030AN Turning on but not booting or POST or no any beep at all.

Have you tried switching the power supply out with one that is known good?

Nov 26, 2007 | ASUS A7V8X Motherboard

1 Answer

C1 led post code

try changing your RAM with new one

Nov 08, 2007 | EliteGroup ECS P4M800-M Socket...

1 Answer

My pc still won't boot up

The beeps are beep codes. Were they short or long? Also do you know who makes your BIOS?

Jul 26, 2007 | EliteGroup P4VMM2 Motherboard

Not finding what you are looking for?
ECS PN2-SLI2+ (V1.0) Motherboard Logo

Related Topics:

2,057 people viewed this question

Ask a Question

Usually answered in minutes!

Top ECS Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Richard Finch

Level 3 Expert

397 Answers


Level 3 Expert

5660 Answers

Are you an ECS Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides