Question about Mtd Garden

1 Answer

Long drive belt cant remember how to put spring back on

I have a MTD 16.5hp shift on the go yardmachine, model nimber 13AN682G729 serial number 407-989. i went to put new drive belt on. parts number 754-0041A its the long lower one that hooks to the motor, when i went to change the belt i removed the extension spring which attaches to raise and lower the deck, well then i didnt pay attention to how it came apart, i had kids destracting me haha. anyways it hooks to a part called the brake return spring which just looks like a letter J part number 732-0722A the extension spring number is 732-04050A i went on
here to find the parts, but cant find how to put that spring and brake return back on http://www.m-and-d.com/pdfs/MTD/13AN682G729.pdf
thanks in advance got to get my lawn cut getting high. thanks in advance Steve

Posted by on

  • stevesmustan Jun 20, 2009

    Thankyou gonna go try it now. ;)

  • stevesmustan Jun 20, 2009

    Do you have a picture of where it hooks up to? I cant see where it goes on the transaxle. everywhere i try and put it, the spring will hit stuff. Man such a easy job and i cant even do it. Thanks

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 376 Answers

The 'j' hook hooks over the transaxle and just hangs there. The spring attaches to the stabilizer rod (reference # 43) and the other end attaches to the "j' hook hanging on the left axle.

Posted on Jun 20, 2009

  • Dwain Pippen Jun 21, 2009

    Nothing other than the parts breakdown. Maybe it goes on the right side. It doesn't matter which side it will go on, it's there to pull back on the deck to tighten the belt when the deck is lowered. Hope that helps.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Mtd yardmachine 7 speed shift to go is my mower. it runs but want pull. does it have 2 belts or just the deck belt. the deck belt has more play than normal ..i think. as i was cutting the grass it stopped...


There are two belts, one for the deck and one for the main drive. The main drive belt can be seen on the upper pulley under the engine. Check to see if it has slipped or broken.

Aug 02, 2011 | Mtd Garden

1 Answer

Can i have a mtd pro 800 series drive belt diagram please


Cant find the diagram without more info but if you go to the link I have here and enter your model and serial number it will supply you a manual and it will be there. If you need further help please contact me. thank you.http://manuals.mtdproducts.com/mtd/Public.do

Jun 07, 2011 | Mtd Drive Belt 42"

1 Answer

Mtd snowblower yardmachine 3 hp/21"


if you are standing at the handles of the snow blower , kneel down there should be a sticker on the drive cover between the wheels , hope that helps

Jan 13, 2011 | Mtd Garden

1 Answer

I have a 1999 Yardmachine(MTD) model #13AS679G062, serial #1H287H2007-42 inch deck; when cold starting, the blades do not disengage, with the lift deck all the way up, clutch pedal depressed. I have...


Yes worn belts do stretch. On an MTD mower, like yours, there are blade brakes assemblies on either side of the mower where your feet rest. They stop the blade rotation when they make contact with the top of the deck pulley assembly. Part # 761-0168B Is the part # , you are looking for, you will need two of them.
Good Day.

Oct 09, 2009 | Garden

1 Answer

I replaced the drive belts on my MTD Tradesman model 139-652-118. Now it won't hardly shift and the break has to be pressed very hard to stop. When I put it in the lock for speed shift it used to sit with...


Make sure you put the right number belt on it. Then, look at the belt routing chart in the owners manual. It sounds like you may have used a belt that is too short, or routed the belt wrong, possibly at the pulley which loosens belt tension when you press on the brake/clutch.

Aug 22, 2009 | Mtd Garden

1 Answer

I need a diagram showing how to put the drive belt back on a riding lawn mower MTD model 13A869F190


Hi,
I'm having trouble with the number you provided. Please revisit your mower and obtain the model number and serial number, then click on this link:

http://manuals.mtdproducts.com/mtd/public/list.jsp?BrandCode=10301&LeftNav=true&langId=-1#

Type in your info to obtain your users manual for your mower. It should contain the belt routing diagram you're looking for.
Hope this helps... Good luck!

Aug 06, 2009 | Mtd Garden

1 Answer

Variable speed belt issue


Get your model and serial numbers from under the seat. Then go to the MTD website where you can download the owners manual which should show the belt diagram.

May 24, 2009 | Mtd Garden

Not finding what you are looking for?
Garden Logo

Related Topics:

685 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mtd Garden Experts

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Tim Whalen

Level 3 Expert

3074 Answers

Phil Walker
Phil Walker

Level 3 Expert

608 Answers

Are you a Mtd Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...