Question about Ducane 30400042 (LP)

1 Answer

Steps in replacing 5 burners on Ducane burner mod 30400042

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 9 Answers

First calll Weber to get your replacement burners for free. There is a five year warranty on this model which is a little over 4 years old. I know this because I just received them from Weber for free.

Remove the grates and burner heat deflectors. There are 4 screws on the knob panel, 2 on the left and 2 on the right. Remove the screws and pull back about a inch or two. I found it helpful to open all the doors a bit to rest the panel on them. The burners should remove easily once this is done. Replace the burner tubes and be sure tubes have holes facing up on the one side for correct heat distribution. When placing the knob panel back on, make sure that burner tubes go onto the gas control knob correctly. Replace screws on the knob panel.

****Get a wire brush about the size of a tooth brush to clean the starter, the thing that makes the spark to start the flame.****

Posted on Jun 26, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Only 1 burner lights


This symptom is typical of a failing regulator. Try replacing the regulator and hose, easy to do and inexpensive.

Jul 09, 2010 | Ducane 30400042 (LP)

1 Answer

How to replace bbq tube burner for ducane grill


You can dowload a manual for your gill from the ducane web stire. Pictures and instructions are in the Annual maintenance cleaning section. You will need Adobe Reader to view thw dowload. Web site: http://www.ducane.com/manuals/
They have Meridian and Stainless models in 3 & 5 burner for LP & NG.

Apr 16, 2010 | Ducane 30400042 (LP)

1 Answer

How to change burners for a ducane meridian 32 inch 5 burner gas grill


Go to Ducane web site http://www.ducane.com/manuals/ and download the manual for your model.

Has Mederian 3 & 5 burners and LP & NG
Also has Stainless 3 & 5 and LP & NG

Need Adobe Acrobate reader that can also be downloaded.
Manual shows step by step in Annual Cleaning section

azrsanford@comcast.net

Apr 04, 2010 | Ducane Meridian 32 Inch 5 Burner Gas Grill...

1 Answer

Burner will not stay lit


try to replace the regulator on the grill

Mar 20, 2010 | Ducane 30400042 (LP)

2 Answers

I get an ignite but my burners wont light. I have


did you try replacing the battery? it is inside the ignitor button.

Aug 04, 2009 | Ducane 30400042 (LP)

1 Answer

I have a ducane stainless steel ducane 30400042. Weber has sent me new burner bars since the old ones rusted but you do I install them?


Remove the grates and burner heat deflectors. There are 4 screws on the knob panel, 2 on the left and 2 on the right. Remove the screws and pull back about a inch or two. I found it helpful to open all the doors a bit to rest the panel on them. The burners should remove easily once this is done. Replace the burner tubes and be sure tubes have holes facing up on the one side for correct heat distribution. When placing the knob panel back on, make sure that burner tubes go onto the gas control knob correctly. Replace screws on the knob panel.

****Get a wire brush about the size of a tooth brush to clean the starter, the thing that makes the spark to start the flame.****

Jun 20, 2009 | Ducane 30400040 Stainless Steel Grill

1 Answer

Need to replace burner tubes on a Ducane grill. How do you do this? How do you get the old one off? I don't have a manual anymore.


First call Weber to receive the Warrenty burners for free. Have model and serial numbers ready. They can be found on one of the doors. Here is what I did for my Ducane model 30400042.

Remove the grates and burner heat deflectors. There are 4 screws on the knob panel, 2 on the left and 2 on the right. Remove the screws and pull back about a inch or two. I found it helpful to open all the doors a bit to rest the panel on them. The burners should remove easily once this is done. Replace the burner tubes and be sure tubes have holes facing up on the one side for correct heat distribution. When placing the knob panel back on, make sure that burner tubes go onto the gas control knob correctly. Replace screws on the knob panel.

****Get a wire brush about the size of a tooth brush to clean the starter, the thing that makes the spark to start the flame.****

Jun 07, 2009 | Ducane 30400042 (LP)

1 Answer

I need to know how to remove the stainless steel burners and replace them.


Call Weber to receive free warrenty burners. Have model and serial number found inside one of the doors on your grill. I just received them in the mail about a week ago and just replaced my burners today. Here is what I did.

Remove the grates and burner heat deflectors. There are 4 screws on the knob panel, 2 on the left and 2 on the right. Remove the screws and pull back about a inch or two. I found it helpful to open all the doors a bit to rest the panel on them. The burners should remove easily once this is done. Replace the burner tubes and be sure tubes have holes facing up on the one side for correct heat distribution. When placing the knob panel back on, make sure that burner tubes go onto the gas control knob correctly. Replace screws on the knob panel.

****Get a wire brush about the size of a tooth brush to clean the starter, the thing that makes the spark to start the flame.****

Apr 16, 2009 | Ducane 30400042 (LP)

1 Answer

Gas burners heat unevenly


I had a similar problem. I took off the burner heat deflectors and seen gaping holes in the burner tubes. Get your model number and serial number and call Weber. Most Ducane grills have a 5 year warranty on the burner tubes. They will ship them free if under warranty!

Nov 10, 2008 | Ducane 30400042 (LP)

Not finding what you are looking for?
Ducane 30400042 (LP) Logo

904 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ducane Grilling Experts

Gary Kenady
Gary Kenady

Level 2 Expert

140 Answers

paulcarew

Level 3 Expert

2518 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Ducane Grilling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...