Question about Toto Drake ADA Compliant Toilet with Elongated Bowl

2 Answers

Toto toilet with gmax flushing system blue top

Toilet is flushing fine, but after flush the water delays filling up the tank. Delay seems to be getting longer. Can I remove something and clean out. Cannot seem to find a diagram of this system
Thanks for any help Roger

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have the same problem and can not find a solution. The toilet flushes fine but then a delay in filling up the tank occurs. Is there a part I can replace? Does something need to be cleaned or cleared?

Posted on Jan 15, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Page 3 it is a pain in the butt to take the blue cap off , but after that it is a 10 minute fix. no tools needed. http://admin.totousa.com/Product%20Downloads/0GU032,%20DUAL%20FLUSH%20TOILET,%20OM,%20V.03.pdf

Posted on Jan 05, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get the water to stop filling the tank on my toto ST794S toilet?


there should be a screw adjustment on the ballcock or fill assembly...screw that down some to adjust...that regulates your tank water level....that screw goes in or out to adjust...one or other should do the trick...may have to do this a few times to get proper adjustment...good luck..

Jul 07, 2014 | Toto St794s-12 Nexus Tank With G-max...

1 Answer

Toto toilet won't flush


Replace the assembly. This is common in areas with high mineral content in water. You will be glad you did. Delay too long, you may find your toilet running while you are at work .

Jan 25, 2013 | Toto Drake ADA Compliant Toilet with...

1 Answer

After a water main problem in the neighborhood was worked on with my home losing water pressure the water in the house became airborne. My toto gmax flushed once or twice with brown water and then...


turn off water to toilet.Take the three top screws out of the flush valve .Which is that valve the water pours out from to fill the tank.clean the diaphram inside.Probably see alot of dirt inside.You'll probably want to take all your aerators off your faucets and flush the dirt out of them too

Jan 21, 2011 | Home

1 Answer

Toilet flushes fine but when the tank has filled it seems like the float ball keeps bobbing up and down letting more water or air into the tank. it will do this 5/6 times then quits. its almost like it is...


The ball float follows the tank water level, and repeated cycles of the float dropping and opening the fill valve would likely reflect a leak in the flush valve. You could try adjusting the float arm downward so that it will respond to a lower water level. Try turning off the supply valve, flushing it and listen for water leaking past the flush valve after it closes. If it does, replace the flapper or adjust the chain.

Nov 13, 2010 | Toto Aquia II Dual Flush Toilet

2 Answers

Toto toilet


check the pipe connection from water tank

Mar 17, 2010 | Toto Washlet S400 for Power Gravity...

3 Answers

Gmax flushing system won't stop


WATER LEVEL IS NOT PROPERLY ADJUSTED. REDUCE WATER LEVEL TO FILL LINE

Jan 07, 2010 | Toto Drake Tank W/GMAX RH COTTON WHITE...

1 Answer

G-max flushing system is not filling to proper level


Is it not refilling the tank or the bowl? I've got a toto also that is not fully refilling the bowl after each flush. No leaks or other problems. Tank refills fine. Seems that the flapper doesn't float long enough to allow a sufficient amount of water to drain into the bowl before closing. Any ideas?

Jan 06, 2010 | Toto Drake ADA Compliant Toilet with...

3 Answers

Delay on tank fill after flush. Toto Drake bowl ada elongatred


I am not a plumber but stumbled across the solution on my own. While watching the float during the flush cycle, it was obvious that it was very slow in moving downward along with the water level in the tank. The problem was that the small opening in the float chamber was partially clogged. Using just my fingers, I reached under the float chamber and cleaned off any debris that was blocking the opening underneath the float chamber. Put the float back on, and instantly the problem was solved. The tank fill started immediately after I flushed.

Mar 09, 2009 | Toto Drake ADA Compliant Toilet with...

1 Answer

Toto Toilet - no water flow to refill tank after flush


Remove the tank lid and look at the fill valve. Is it a yellow valve?
This fill valve is common on the Toto Toilets and can easliy plug with debrie.

They can be disassmbled and cleaned. however, I usually just replace the valve with Fluid Master Fill valve.
You will also want to check the water coming into the toilet by turning off the water that supplies the toilet and disconnecting the water supply line. After removing the water supply line turn on the water at the valve to make sure that the water is flowing properly. Check the supply line also to make sure it is not plugged.
Be sure and place a small container to catch the water that will come from the valve. A towell will also help from making too much of a mess.
If the Supply line and the valve are clear the problem is in the fill valve.
The G-Max system denotes the Flushiing system which is a 3" flapper that allows the water from the tank to flow into the bowl quicker.
Good Toilets!

sanray

Jan 05, 2009 | Toto Toilets ST753S 01 Cotton Dartmouth...

1 Answer

Toto GMax Flushing System drips


What you are experiencing is a flapper valve problem. Since I don't know what model you have I will give you a link to the generic GMax unit. Here is the parts breakdown for a GMax

Toto GMax

I would suspect you need part #7 on this diagram a flapper valve. Take the old one with you since different colors ones are used on different models. You should go to the Toto site to locate a dealer first. You can find their site here:

Toto USA

Hope this helps and please remember to rate this!

Dec 07, 2008 | Toto Home

Not finding what you are looking for?
Toto Drake ADA Compliant Toilet with Elongated Bowl Logo

3,071 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toto Home Experts

Donni Steen

Level 3 Expert

659 Answers

john h

Level 3 Expert

12650 Answers

Robert McCall
Robert McCall

Level 2 Expert

51 Answers

Are you a Toto Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...