Question about HP PSC 1315 All-In-One InkJet Printer

1 Answer

HP PSC 1315 Prints test page every time printer is installed

I have a HP PSC 1350 All-in-one printer which prints a test page every time the printer is switched ON.The problem has sterted ever after replacing the cartridge.I have replaced it with an original HP one.

I have also tried the steps of scanning the test page as suggested in the solution for this problem that has not fixed the problem.

Could you please advice if there are any alternate solutions vailable?

Thanks,
Jay

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 24 Answers

Hi Jay,
This is mike, actually the problem is that that printer has not completed the aligning process, as a result the printer is printing the test page (Alignment page) every time when you turn it ON. So, I would suggest you to let the printer prints the alignment page and check whether the printer prints the page with all colors and it printed fine, once it is done, disconnect the USB cable behind the printer and then place the alignment page on the scanner glass by facing down the printed page downwards and press the scan button. This start the alignment process and the scanning process will be completed once the ON light is stop blinking. This will complete the alignment process.

Once done try to turn off and turn on the printer and check for the result. This should resolve the issue.

However, if the issue persist, then please revert back to me. Be sure that you use the HP genuine ink cartridges, not refilled nor re-manufacture.

Posted on Jun 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My HP PSC 1315 printer/scanner prints the test page every time I turn it on. A 2008 post from littlebluemuffi helped until now, but today it still printed the test pages.


Hi,

This usually happens if the printer is not aligned properly. When you replace the cartridges, it prints a colorful sheet of paper. You need to place the paper face down on scanner glass and press OK button.

This completes alignment and the printer wont print test page again.

Regards,
Sean

Feb 25, 2013 | HP Office Equipment & Supplies

1 Answer

My hp c3150 prints a test page every time i turn it on


Do this. The next time it prints a test page, keep the same test page under the scanner and push the scan button on the c3150. This would complete the test cycle and it would not print test pages from the next time.

Nov 17, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Prints a self test page everytime


Replace ALL ink cartidges with NEW HP cartridges.

Jun 27, 2009 | HP PSC 1315 All-In-One InkJet Printer

3 Answers

Printer prints a test page every time it is turned on.


Hi everyone

After replacing the print cartridges 2 steps need to be done:

1. Wait for the test page to be printed out and

2. Put a page over the scanner glass and press scan button on your

printer.

Turn off the printer and turn it on again to see if the problem was

solved.

Ali Khan

Dec 19, 2008 | HP PSC 1350 All-In-One Thermal Printer

1 Answer

It automatically print a page everytime I start my hp psc 1315


Hi Siddarth

In HP PSC 1315 printer after replacing new Ink Cartridges the printer always prints Alignment test page every time you turn it ON.To resolve this problem you must complete the alignment process.

Steps

1.Turn the printer ON.
2.Once its ON, it will print the Alignment page. Place the page in the scanner bed correctly.
3.Then Press START SCAN button.
4.The power light will start blinking, wait until the power lights turns solid.
5.Now Alignment process is over.Discard the paper from scanner.
6.Turn the printer OFF and then ON, it will not print that page again.

Note:Please follow this steps every time when you replace the Cartridges.

Thanks
Rizwan
rizwan84tx@gmail.com

Dec 08, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Hp printer problem


hi, frined,

which u on printer u get test print , that page u put on scanner and press sceen button on top of printer , after scan page printer understand cartridge if work perfect

Nov 17, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Alignment sheet prints---cannot print anything else


u will have to first scan the alignment paper in your scanner this will solve your problem

Nov 14, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Test Page automatically prints


Disconnect Printer from PC. Uninstall the driver and download most recent driver from HP web site. If there is a print management program which there should be uninstall this as well and download the latest version.

Shut down, not reboot PC
Start PC

Start the install process by installing the print management program installation. Follow the process and test. If it persists try a different USB cable.

Karl

Oct 31, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Test printing


If you've recently changed your cartridges, the printer will try to print a test/alignment page. Note the instructions on the test page indicate what to do to complete the testing/alignment procedure.

1) Let it print.
2) Place the test page upside down on the scan plate.
3) Hit "Scan" and let it finish.

When the machine completes the scanning procedure, you'll be able to switch the printer on and off or reboot your computer without it printing the test page. By Dubbya

Sep 16, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

MY test page always prints


Hi,

I belive that after replacing the INk cartridges, you are experiancing this problem. The Alignment test sheet always prints everytime you turn on the printer, if u haven't completed the Alignment process.

To complete the Alignment process,
>>Once the printer finished printing the Alignmnet test sheet.
>> Place the Test sheet staright on the scanner glass facing down towards right hand corner.
>>Press the scan button(color), the Power ON light will start flashing, wait until it stops flashing.
>>Alignmnet process completed.


Thank You

Feb 09, 2008 | HP PSC 1315 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 1315 All-In-One InkJet Printer Logo

327 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...