How do you print Glossy Photos on a Samsung Color Laser CLX-3160FN printer without the laser buring off the gloss?

Replace black developer unit.Toner cartridge is merely a toner tank

you need to clean the laser unit of machine

Dear This is the Quality issue.
can be solved by replacing black developer in imaging unit.(better solution)
Alternate is change the Imaging unit(costly solution).

Copied this from the specification on HP site.

It would appear not to take 5 x 7. It's the 7" is to small, 8.5 is the smallest.

Media sizes, std.
Letter, legal, executive, No. 10 envelopes, Monarch envelopes
Media sizes, custom
Tray 1, 2, 3: 3 x 5 to 8.5 x 14 in
Media types
Paper (plain, letterhead, prepunched, bond, color, rough, preprinted, recycled), HP Color Laser Glossy Photo Paper, HP Color Laser Glossy Brochure Paper, HP Color Laser Matte Brochure Paper, HP Color Laser Matte Photo & Imaging Paper, HP Color Laser Soft Gloss Presentation Paper, HP color laser transparencies, labels, envelopes, cardstock

Here is a good solution:
http://www.fixyourownprinter.com/forums/laser/56581

There are two major counters in this samsung CLP300 color laser printer.


I will give you the answers for both.


The standard one is the page printed counter.
You can not change that
The only way is to change the system board or get an used printer
(AS LOW AS $80 now!) and swap it.

===

The other set of counters are the toner counters.

eBay seller tpstock6898has them
Set of Samsung CLP 300/CLX 3160FN reset Chips
eBay Item number: 260468470362

http://cgi.ebay.com/Set-of-Samsung-CLP-300-CLX-3160FN-reset-Chips_W0QQitemZ260468470362QQcmdZViewItemQQptZBI_Toner?hash=item3ca521725a&_trksid=p3286.c0.m14#ht_790wt_1165


You can pick up the whole 4 chips set to reset the data to the printer for under $10.

Please post more information on what you like to reset.

I will follow up on this post.

download your manual from
http://www.manualnguide.com/download/manual-guide/samsung-clx-3160fn-color-laser-printer-fax-user-manual.html
Please rate this solution. Thanks.

When you changed the toner did you change the chip for them? you need a special chip for each and evry one of them. I had that problem with my CLX-2160 and i fixed it this way.

Rather than turn printer off, unplug from power source, wait a few minutes and plug back in. It's worked twice for me so far...

the lock is on the underside of the scanner deck, you can see it through the glass.  Reach underneath and slide to unlock.