Question about Heavyduty Jazzy 1121 Standard & Heavy Duty Power Wheelchair

1 Answer

Chair fully charged lrd lights flashing and chair wont move

I was out side yesterday ring to the back of my house of couse i live in florida (sandy) when my chair started to lose power and finally just quit. we checked the wire,fuses and batteries evrything checked out. the only thing it does is the led lights flash thats it nothing more can anyone help thank you
bear hyatt

Posted by on

  • bearh63 Jun 24, 2009

    thank you very much for your advice. i tried that and both batteries are good so i broke down and took it to a dealer lolbut tour advice was very helpful



    bear h

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 37 Answers

Try using a Voltage meter to test the Voltage coming from your batteries. Your batteries should be as close to 12v. your motors are 24v. Even if just one battery is bad this can cause alot of headaches.

Posted on Jun 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wheel chair is fully charged, when i un plug it it wont move


What lights are flashing??? Make, model, controller?????

Jun 15, 2013 | Health & Beauty

1 Answer

Hi I have a Jazzy 614 HD. I charge my chair with (new charger) and it turns off when fully charged and my Joy stick reads fully charged (New Joystick and new batteries) but within three to four hour


perhaps since your chair is over 2.5 years old you have underlaying problems such as motorheatup or excessive drag per a locked bearing or a bushingtrhat is out of lube.somebody needs to at everything that moves thathas to do withload carry,or powertrain.

Jan 12, 2013 | Pride Mobility Jazzy 614 HD Power...

1 Answer

Jazzy 614HD will not move. Lights flash from right to left, then cuts off. Unlock instructions are not effective. Chair is fully charged.


If chair has a tilt, recline or lift seat on it it may be going into lock-out mode on its own due to a limit switch fault. If you don't have any of these options then I suggest you remove the joystick, controller and any wire harness between the two and send them to a shop like mine for repair.
The usual lock out light chase is from left to right - not right to left so this is suspect of a different issue.

Dec 28, 2012 | Pride Jazzy 614 Hd JAZZY 614HD

1 Answer

Do not know if chair is taking a charge lights just keep moving across armrest .how do u tell when fully charged?


hi let me see if i can help ,

When the lights go back and forth on your joystick that means the chair knows its pluged in .Now the chair itself has a built in charger that is mounted on the back of your chair .The back of the chair ,there is a opening a cutout in the frame .when you plug in your chair there will be a red light and a yellow ,yellow means the chair is charging, wait till it turns green,this means fully charged.When you plug in the chair youll see the lights through that hole.Look for the lights.

I recommend my customers to leave there chair charging over night look at the light it will be green when you turn the chair on the joystick should show fully charge.


Good luck hope i was of some help.

Jan 20, 2011 | Invacare Supply Group Invacare Pronto M51...

1 Answer

Battery fully charged chair levers engaged to drive position chair still will not move.. Jazzy 600.... Tried unlock/lock tried putting it in neutral back in drive with levers still wont move please...


Has your scooter been sitting idle for several weeks, or has it been connected to the charger 24 hours a days for a long time? If so, the batteries may have become damaged and will give you enough power to turn the controller on but not enough to make the motors run.
If the lights come on and are steady, the manual brake levers are in the drive position and the chair still will not move, I recommend replacing the batteries. If anything else were wrong, either the lights would flash or not come on at all.
I hope this information is helpful to you, good luck!

Dec 20, 2010 | Pride New Jazzy 600 Power Wheelchair by...

1 Answer

I have an Aspire 18 04, model K0011. The batterey indicator lights show fully charged but when you turn the chair on all the lights fliker real fast and there is no response or sound being made when you...


Dave did you check to make sure you are not in freewheel. If you can push the chair easily then you are. Even having one side in freewheel will cause the flashes. Move the levers to drive mode that are on the back of the motors then turn the chair on and see if it works Hope this helps Also make sure the charger is still not plugged in.

Sep 08, 2010 | Health & Beauty

2 Answers

The lights are flashing and i cant get the chair to move. What should I do?


The flashing lights is a fault code. Count how many lights are flashing, and let us know, then we can tell you what the fault is. Check that both free-wheel levers are in the correct place. Good luck. Neil.

May 20, 2010 | Jet 3 Ultra Power Chair

2 Answers

Pronto 91 fully charged batt but only gey 3 flashes off red light


Batters won't hold charge and work properly it sat up for that long. replace batterys

Aug 27, 2009 | Invacare Supply Group Invacare Pronto M91...

1 Answer

Led lights flash and Pride Go chair won't move.


Firstly disengage the drive levers and then "flick "them in fash.
Second pull out the large plug that is between them.
Check for damaged or bent or loose pins. press it home firmly .
I did this on my wifes chair and she zooms around.
All switched etc should be off during charge.

Lastly i fully discharged then recharged the battery to ensure no "battery charge memory".
To fully dicharge i shoved a small box between back wheels so to lift of ground and then a elastic band to hond controler on.

Jan 11, 2009 | Pride Go Chair Travel Power Chair

Not finding what you are looking for?
Heavyduty Jazzy 1121 Standard & Heavy Duty Power Wheelchair Logo

408 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heavyduty Health & Beauty Experts

Robin Hill
Robin Hill

Level 3 Expert

1263 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Jeff Tilburn
Jeff Tilburn

Level 3 Expert

870 Answers

Are you a Heavyduty Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...