How do i set up my cobra 29lyd - Cobra 29 WX NW ST 40-Channels Base CB Radio

Try contacting Cobra directly: Support Cobra Electronics Corporation

Try asking Cobra directly: Support Cobra Electronics Corporation

Your code (PL code, interference eliminator, quiet call) is not programmed the same on both radios. The Cobra appears to be set to open squelch (no code). Set your Motorola code setting to zero (off). This should solve the problem.

Trash and buy new, or contact Cobra directly: Support Cobra Electronics Corporation

vr1 "s" 9 setting on the tx meter vr2 voltage setting vr3 squelch vr4 amc vr5 p4 display on tx signal meter.

If you have not bought it yet some dealers may have them already set up.Cobra is a popular radio so before you buy ask. you could just match it up to a cobra 25 mic though.

Cobra tech support may be able to assist
Support Cobra Electronics Corporation

Here is the link for the manual for the Cobra radios: http://www.retrevo.com/support/Cobra-PR-3850WX-2-way-Radios-manual/id/23311dj078/t/2/

Try contacting Cobra support directly here: Support Cobra Electronics Corporation

I would recommend contacting Cobra directly. Here is a link: Support Cobra Electronics Corporation