Question about Kenmore 24032\24036 Top Load Washer
When the washer starts, it beeps through the whole cycle
This symptom indicates a stuck key on the user interface control board.
Replacing this control board would most likely fix this type of problem.
The part number for the user interface for this model is 8564374.
You can order this part from SearsPartsDirect.com, RepairClinic.com, PartSelect.com etc.
The procedure for replacing this control board is shown in the images below.
Before buying any parts I suggest you access the interface ribbon and disconnect it and then connect it back and see if there is any improvement.
You might also remove the interface from the console and check the console for any stuck buttons.
Remember to unplug the washer first.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Posted on Sep 17, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 25, 2016 | Whirlpool Washing Machines
Jan 05, 2016 | Washing Machines
Jul 28, 2012 | Fisher and Paykel Washing Machines
Jun 19, 2011 | Fisher and Paykel GWL11 Top Load Washer
Jan 19, 2011 | Maytag Neptune MAH5500B Front Load Washer
Jun 12, 2010 | Kenmore Washing Machines
Jan 19, 2009 | Kenmore 24032\24036 Top Load Washer
Jul 23, 2008 | Whirlpool Duet GHW9150P Front Load Washer
65 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: