Question about Kenmore Washing Machines
F35 is a water level error.
The water level switch (pressure switch) has malfunctioned.
If you remove the top panel, three screws in the back, you will have access to the pressure switch.
With the tub empty, remove the vinyl hose from the switch and blow backwards through the hose to clear any restrictions.
If the fault codes return after doing this, you will likely need to replace the pressure switch.
Also - please be sure to use He soap.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
Posted on Sep 11, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jun 18, 2012 | Kenmore HE5t Steam 4.0 cu. ft. Front-Load...
Hello & Welcome to FixYa
F35 error means that there is some sort of issue with the steamer electronic board and analog pressure sensor has gone bad. Check that the hose is firmly attached with the washer and is not blocked. You can also check the water level pressure switch operation. Please get back to me if you have any other questions.
Jun 15, 2011 | Kenmore Elite HE5t Washer
Nov 01, 2010 | Kenmore Elite HE5t Washer
Sep 26, 2010 | Kenmore Elite HE5t Washer
Jul 08, 2010 | Kenmore Elite HE5t Washer
Apr 09, 2010 | Kenmore Elite 45986 Front Load Washer
Feb 21, 2010 | Kenmore Elite 45986 Front Load Washer
Sep 06, 2009 | Kenmore Elite HE5t Washer
Jul 27, 2009 | Kenmore Washing Machines
102 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: