Error code EL 2 on treadmill will not start - Startrac Fitness Products Star Trac 3900 Treadmill Remanufactured

If the E1 error occurs after the belt starts to move for several seconds, the error code means that the system is not picking up the speed of the motor. This pickup comes from a magnet mounted on the front roller pulley and a speed sensor, or a problem with the magnet.Feb 29, 2016

E1 Error Codes - The Treadmill Engineer

treadmill-engineer.com http://www.treadmill-engineer.com > 2016/02 > e1-error...

Reebok ZR9 treadmill has E01 error on console since ...

JustAnswer https://www.justanswer.co.uk > electronics > ca4k2-ree...
Reebok ZR9 treadmill has E01 error on console since moving · 1. Turn the machine off at the mains socket for at least 30 seconds · 2. Turn the machine on at the ...

• 
  

  I have a Rebok ZR8 treadmill that displays an E01 error

  https://www.justanswer.co.uk > fitness-equipment > dwrp...
  It is the internal sensor tr the mainboard that has faulted. I am really sorry about this and you are going to have to return the unit to have these tested and ...
  
  

..

Whatever caused the lower control PCA to fail when Snap Fitness had it has caused the replacement lower PCA to fail. The trouble is somewhere else.

Hola buenas noches quisiera que me pudieran apollar con una caminadora lime pro modelo D5.0 . El tablero realiza sus funciones pero la banda no gira al precionar Star no me arroja ningun c?digo g se los agradecer?a

The error code by definition is listed in section 3 of the service manual.

http://www.sportsmith.net/images/product_support%5Cstartrac%5CTechnical%20Manuals%5CTreadmills%5CSvcMan%20TR4500.pdf

All the error codes can be found in the service manual in section 3.

http://www.sportsmith.net/images/product_support%5Cstartrac%5CTechnical%20Manuals%5CTreadmills%5CSvcMan%20TR4500.pdf

tengo un error E06 tengo 2 meses que compre el equipo espero puedan ayudarme mi correo es [email protected]

Matrix Treadmill, (T5x, T7x) Control Board, Motor, 1.5KW/90~264V, JHT01

From time to time, error codes will pop up on your treadmill. It just takes a quick second to clear the error log and get the treadmill up and running again.
1.When the treadmill is not in use, press the "Stop," "ENTER" and "QUICK START" buttons in rapid succession. The "RESET" button can also be used, in place of the "Stop" button.
2.Press the "ENTER" button three times to access the treadmill's error log.
3.Press the up or down arrows to scroll through the error codes, if necessary for club or personal logging purposes.
4.To view the treadmill's odometer reading when a particular error code was elicited, press "SELECT" while a particular error code is displayed.
5.To clear the error log, press "QUICKSTART" for a minimum of four seconds while viewing the list. Prompts will appear on the display and let you know when the log has been deleted.
I hope you find it very helpful.

EL 2 Error code means an erratic reading coming from the elevation potentiometer. Unfortunately that means a replacement of the motor Star Trac does not sell just that one part. But you maybe able to send the motor to be repair for aabuot 1/2 cost of a new one. Call this # 1800-496-7278 conpany's name is Nation Gym parts they can help you

Hi,

I will start from your Question 2 than Question 1 :)

Now,

Error 211 - Clear the error by pressing Power or Clear. Attempt to operate the treadmill again. If error persists, replace VSD or grade motor. Belt and display may continue to be used during Fault conditions by pressing Clear.

Error EPLO - It refers to an electrical problem or might be a Blown Fuse.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!