Question about Craftsman Tiller / Cultivator Operation Manual
Does craftsman mini tiller have a safety switch
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Set you spark plug gap to twenty five thousands, or the width/thickness of a match book cover if you have no gauge.
Sounds like you will need to clean your carburetor.
Sometimes you can get by with priming it a few times, and letting it run a few times like that and it will flush the gunk out of the jets,but most of the time you will need to rebuild the carburetor.
If the mower/weedeater is over a couple years old, then I also recommend that you buy and install a new carburetor repair kit,because the diaphragm will get hard and that will cause it to be hard to crank.
When you clean your carburetor and remove the jet screws, You will first seat the jet screws and count the number of turns it takes to seat the jets from their original position.
That way when you go to put the jets back in, you know how many turns they were in/out.
Please do not forget to rate me, Thanks
Good Luck, I hope this helped
Posted on Jun 02, 2010
SOURCE: craftsman mini tiller
Our MiniTiller died so we tore it apart and cleaned it. It still did
not work so we tore it apart and examined it more thoroughly and then
found the carburetor to be in a horde mess. We don’t want to repair it
ourselves so knowing where to buy a new one or to know where to find a
repairman would help.
Posted on Jun 02, 2010
Craftsman part numbers will help on this search. Typically 3 digits separated by a '.' such as 345.45687
If you can find these, please re-post the question. :)
Posted on Sep 25, 2010
Tips for a great answer:
Oct 08, 2015 | Craftsman Gas Mini - Tiller/Edger
Oct 15, 2012 | Craftsman 2-Cycle Mini Tiller
Apr 14, 2011 | Mtd Craftsman 4Cycle Mini Tiller
Mar 31, 2011 | Mtd Craftsman 4Cycle Mini Tiller
Oct 21, 2010 | Craftsman Gas Mini - Tiller/Edger
Sep 25, 2010 | Craftsman Gas Mini - Tiller/Edger
Nov 21, 2009 | Craftsman Gas Mini - Tiller/Edger
Oct 25, 2009 | Craftsman Gas Mini - Tiller/Edger
22 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: