Question about Teac DW 28E CD-RW/DVD-ROM Burner

1 Answer

Dvd drive WILL NOT read burnt dvd's or CD's

After Burning a dvd RW when i stick it in my laptop to read it, it will not read the files i have just burnt on it. but when i put it back in my other computer it shows everything just fine. and i am using nero 9 to burn the dvd with. my computer is a dell inspiron 1150. When i place the dvd in my laptop the light flashes green like it starts to read it but then all the sudden it starts making a wierd noise every few seconds, after about 10-20 seconds of this the green light stops flashing completly and the dvd is no longer spinning. In my computer file when i try to open the dvd drive file it shows that there isn't even a dvd in it half the time. why is this. do i need to replace it. we have tried all the cleaning ways and took it out and made sure that nothing was dirty or stuck in in. HELP??!!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 280 Answers

The problem occurs mostly when your drive is dying. I had the same problem with my laptop writer recently after which it completely stopped writing discs. Contact your support. Sometimes they would ask you to remove the upper and lower filters of an entry in the registry which would sometimes resolve the problem.

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can not burn a cd with GH24NS70 cd/dvd drive . No software with the drive. Can you e-mail me the software for this drive. Thanks....


there are plenty of free burning software programs on the internet


http://download.cnet.com/active-iso-burner/3000-2646_4-10602452.html

Active ISO Burner will allow you to burn an ISO image file to CD-R, CD-RW, DVD-R, DVD+R, DVD+R DL(Dual Layer), DVD-RW and DVD+RW (including double layer, DL). Active@ ISO Burner software accepts command line parameters to automate ISO images burning process.

http://download.cnet.com/instant-cd-dvd-burner/3000-2646_4-10393316.html
Burn audio, video, and data CDs/DVDs and create and burn ISO files. Instant CD & DVD Burner is the ideal choice for anyone looking for a simple but full featured CD/DVD burner. Build and burn ISO files on the fly and compile all kinds of audio, video, and data CDs and DVDs from any kind of file (MP3, WAV, AVI, MPEG, DIVX, XVID). Instant CD & DVD Burner supports all major drives including CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW, and DVD-RAM (SCSI, IDE, EIDE, and USB 1.0 and 2.0).


there are plenty of free burning software programs on the internet

http://download.cnet.com/burn4free-cd-and-dvd/3000-2646_4-10217894.html
Burn4Free CD and DVD is a burning solution that's compatible with more than 3,000 DVD, Blu-ray and CD burners. Burn data and audio from different file types (WAV, WMA, MP3, OGG, FLAC, WavPack, and CDA). Burn and save ISO files, open and save your project to disk, verify content, print compilations, copy DVD, copy BLU RAY and import your audio compilation from M3U and ASX playlists. The drives supported include dual-layer DVD, CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW, and DVD-RAM, BD-R, BD-RE (SCSI, IDE, EIDE, and USB 1.0 and 2.0).

Sep 06, 2011 | LG ELECTRO LG DVDRW GH24NS70 24X SATA with...

1 Answer

I have a samsung cd-r/rw sw-240b when I try to save file on a cd in the d drive it give a message unable to write to drive D:


you cant save a file you must burn it to a disc
this might be in your burning software if you have already burnt data to this disc and are try to add more data you will need the burning software to support multisession or you might not have a cdrw disc or a faulty one
hope this helps

Feb 17, 2011 | Samsung SW 240B CD-RW Burner

1 Answer

My disk drive doesn't detect burning media.


You MUST have software that is for burning a CD.

Some examples are "CD Creator", "Nero" and others.

These programs are OFTEN not included and MUST be purchased seperately.

Oct 21, 2009 | LG GSA-T20N DVD±RW Dual Layer Burner

3 Answers

Burning DVD


Impossible, since your device _reads_ CDs/DVDs, but does not _write_ either CD nor DVD.

Do you have a USB memory-stick (holding 4Gbytes) ?
If so, copy the files to the memory-stick,
and take the memory-stick to your friend's computer,
presuming that his/her computer has a DVD-writer.
That DVD can be _read_ on your computer.

May 22, 2009 | Compaq Presario R3000 Notebook

1 Answer

Sony CD/DVD Player DVP-NS50P not playing my avi files DVD+RW


You need to convert avi files to dvd format before burning, otherwise the player won't recognize them. Google "avi to dvd" and you'll find a number of free or pay programs that will do the conversion for you.

Nov 19, 2008 | Sony DVP-NS50P DVD Player

1 Answer

Can't read some burnt dvds


Try updateing your drivers firmware.
also cleaning the lens with a lens cleaning cd/dvd kit.

if that doesnt solve the problem then the lens system would need to be replaced -> better to buy a new drive.

May 01, 2008 | Samsung (SH-S162L/BEBN) DVD RW Burner

1 Answer

Cannot copy files to DVD disks


First of all you should have the recording tab ON. Have you tried burning using Nero instead of dragging and dropping? This may solve the problem.

However, if you prefer to drag and drop, try setting the write speed to a slower setting, even if the dvd burner has faster write capabilities.

1. I do not think it is a hardware issue.

2. You can try replacing the IDE cable, but if you can read the contents of the disk it does not suggest a communication issue between the drive and mobo.

3. I do not think that the burning software is to blame, when you drag and drop you are actually using a windows based burning software that is installed with the operating system.

4. set up your files to burn through nero, let the software do the work.

I had the same issue with my dvd burner, although slightly different error messages, solved it by using nero instead.

Apr 12, 2008 | E-Machines eMachines Desktop PC

1 Answer

Pioneer DVR-109 DVD±RW...


This ahs to with speed of recording of the CD/DVD try reading CD/DVD burnt at a lower speed like 16x.

Most DVD writers has low maximum reading speed as compared to CD-ROMs.

You can try burning a CD on it and then reading it, if reads then it shows that other cd were burnt at faster speed than it can read.

If it read lower speed CDs then you can just add an additional DVD/CD-ROM just to read faster speed disks.

Mar 24, 2008 | Pioneer DVR-109 (44121479) DVD±RW...

1 Answer

CD-RW and DVD-RW problems


u might not be burning them in the right format. try burning them as a dat file or a dvd/vcd format

Feb 23, 2008 | Sony MHC-DP1000D System

3 Answers

Sony DVD RW AW-Q170A Burning Problem Plzzz.....Help me out: i have two drives, 1) Sony DVD RW AW-Q170A 1.70 Ver 2) Sony DVD/CD-RW Combo RYK4 Ver My "Sony DVD RW...


Check that the writable DVDs you are using are compatible (+/-) with your Sony DVD-RAM.
Go to Windows Explorer and check to see if the Sony drive is visible. It may not be connected or the Jumper switch may be set incorrectly.
Check you have drivers installed, take a look in Hardware manager.
Sometimes, it's a little difficult to copy CDs and DVDs when you have more than one burning suite installed - for some reason, they 'just don't get along'. Try uninstalling any suites other than Nero.
Or it may just be that your Sony CD-RW drive is just that, and your DVD-RW drive is just that. So it wouldn't be possible to write DVDs on the CD-RW and CDs on the DVD-RW? Though I would assume Nero would detect that and use your hard-drive as temporary storage.
In Nero SmartStart, have you selected the CD or DVD tab to correspond to the project you're burning?

Jan 07, 2008 | Sony AW-Q170A-B2 DVD RW Dual Layer Burner

Not finding what you are looking for?
Teac DW 28E CD-RW/DVD-ROM Burner Logo

334 people viewed this question

Ask a Question

Usually answered in minutes!

Top Teac Computers & Internet Experts

Computer Links

Level 3 Expert

2385 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18409 Answers

Sunday Ojelabi
Sunday Ojelabi

Level 2 Expert

302 Answers

Are you a Teac Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...