Question about Welding Tools

Open Question

Looking for a super 160 tig welder manual - Welding Tools

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2712 Answers

SOURCE: TIG welder help

Choose the electrode to use for the project you are starting as well as the variety of alloys you'll use such as the 6061 Aluminum alloy electrode. Grind the electrode to a point. Try to create a tip and sharpen it to help it become more rounded as you weld. Place the electrode into an electrode holder with the tip about 1/4-inch away from the sheath. Choose the settings on your tig welder. The three main ones are AC, DCEP and DCEN. Choose AC for aluminum. Slide the "cleaning/penetrating" slider more to the penetrating side. Set the "air on" to five seconds and the "max amps" to 250. Turn on the gas. For aluminum, use pure argon. For steel, an argon and carbon dioxide mix. Scrub your welding table or flat piece of sheet metal with a wire brush to make it clean and flat. Gear up in full welding safety gear including hood, goggles, apron and gloves. Hold the electrode in your dominant hand and start your welding project. Check your settings every so often to make sure they haven't changed and adjust as needed.

Posted on Aug 27, 2008

CarlGehrke
  • 169 Answers

SOURCE: Manual for a Cambell Husfeld welder Model WF2000

You can download PDF versions of the manuals for CH welders at the Campbell Hausfeld website.
Look on the left under the Service Center heading for a link to manuals.

Rank this answer if you found it useful,
Carl

Posted on Dec 03, 2008

  • 7 Answers

SOURCE: Miller TIG Welder Syncrowave 350XL has no digital read out...

it's free for you to download.


http://www.millerwelds.com/products/tig/syncrowave_350_lx/

Posted on Mar 21, 2009

GiantTechGuy
  • 25 Answers

SOURCE: Looking for manual for my mitech super 160 welder

When you press the torch trigger what sound/sounds do you hear from within the machine?

Posted on Oct 18, 2009

kel1guy2002
  • 3740 Answers

SOURCE: Hello, Where can I get a users/owners manual for Linde UCC 305

Jessie email the owner of this site and see if he can't hook you up. He worked for Linde for 25 years.

http://weldingweb.com

Posted on Mar 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a CT-200 Hobart Welder Getting high frequency but no current?


Sounds like the problem could be with your tig torch. Inside the tig torch you have a copper cable which carries your main welding current. If there is a break in the copper the high frequency is of such a high tension voltage that it can jump across the break in cable making it appear that your tig torch is fine. If you have a multimeter check continuity from one end of the torch to the other or try another tig torch.

Nov 06, 2011 | Hobart Handler 140 Mig Welder

1 Answer

I have a Miller Big Blue 251D and while welding it died and won't restart.


Hi:
Have you check the fuses? Probably your machine experienced an overload. Check your owners manual on the troubleshoot section. Here's the link to the manual.
http://www.millerwelds.com/om/o480ac_mil.pdf
Good Luck

Jun 15, 2011 | Miller SYNCROWAVE 250 DX TIG RUNNER WELDER...

1 Answer

Looking person who can repair miller tig welder?


Where are you located...we work on them here all the time but I am in the Greater Pittsburgh, PA area

Jan 21, 2010 | Miller SYNCROWAVE 250 DX TIG RUNNER WELDER...

1 Answer

Looking for manual for my mitech super 160 welder


When you press the torch trigger what sound/sounds do you hear from within the machine?

Mar 15, 2009 | Welding Tools

1 Answer

I have a miller dynasty inverter tig welder   It has a help code that comes on when I turn it on the code is p-2


From the user manual for a generic dynasty model welder:
2 Help 2 Display
Indicates an open in the thermal protection
circuitry located on the left side of the unit.
Contact a Factory Authorized Service
Agent if this display is shown.

So you could have anything from a broken or disconnected wire to a bad thermal switch.

You can get user manuals specific to your welder at www.millerwelds.com

Rank this answer please,
Carl

Nov 26, 2008 | Miller DYNASTY 350 TIG WELDER w/TIG TORCH...

2 Answers

Manual for a Cambell Husfeld welder Model WF2000


You can download PDF versions of the manuals for CH welders at the Campbell Hausfeld website.
Look on the left under the Service Center heading for a link to manuals.

Rank this answer if you found it useful,
Carl

Sep 20, 2008 | Welding Tools

2 Answers

TIG welder tips


Go to your local welding supply store. A TIG welder is a specialized welder that cannot be found at a building supply store. Stores like Maine Oxy-Acetylene Supply or Grainger Industrial Supply will carry them. Look in the classifieds of publications like Uncle Henry's. There you might find a TIG welder that someone is selling—and it may be at a good price. Be sure to ask the owner questions and take a look at the TIG welder before buying it. Explore eBay. Yes, even eBay has TIG welders. You'll need to ask the buyer questions about the welder's history and more. Perhaps, if the seller is near enough, you might be able to pick up the TIG welder yourself and save on shipping. Visit online retailers. Retailers like Welders Direct or Welding Mart carry TIG welders and would be able to answer any questions you might have (see Resources below). Consider the manufacturer of the TIG welders themselves. Lincoln, Miller, Hobart and others have their own websites. Call the companies directly and ask a lot of questions. These vendors are the best product source for welders (see Resources below).

Aug 27, 2008 | Miller COOLMATE 3 115V TIG TORCH WATER...

Not finding what you are looking for?
Welding Tools Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Welding Tools Experts

Brad Brown

Level 3 Expert

15478 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Bill Boyd

Level 3 Expert

40764 Answers

Are you a Welding Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...