Question about GE JGRP17 Gas Single Oven

2 Answers

Magic chef oven/stove top range not staying hot

My magic chef oven/stove is 10yrs old... the problem is you turn the oven on an it get to the temp like 350 then it goes back down to like 200. we just change out the Thermostat it work great for the first time then used it again and the same old problem again.. any solution out there?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,136 Answers

Hi, It very well could be the ignitor. Sometimes they work at first and then will not open the gas valve later in cycle. You can set the oven to heat and watch the ignitor. If it glows and the gas will not ignite in 30 to 45 seconds, the igniter is getting weak. I jope this helps.
Please let me know if I can assit you further.

Vic

Posted on Jun 20, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a GE XL44 -- gas, was working, then stoped: oven broiler will light -- when using a tempeture setting, say 400 degrees, the oven produces no heat.

Thanks

Posted on Jun 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Magic Chef Chateau stove pilot goes out when two burners are used!


The pilot flame may not be set high enough to cope with the demand of two burners.

Dec 19, 2013 | Ovens

1 Answer

My stove is about 43 years old and the round red igniter broke. I need a new onefor magic Chef Model#TZ-800C-3WP.Can I get a new one?


Hello Barbara,

Is the ignitor you need for the oven, stove top surface burners. If for the oven is it about a inch or so in round diameter and about 4-6 inches long with 2 wires to it and glows when oven is turned on?
the very old ignitors for the oven was a square/rectangle glow plug about a inch or so square


Which best describes the one you need?

Gene

Aug 09, 2011 | Magic Chef Ovens

1 Answer

I have a magic chef S68-3cxw electric stove/oven. It is flashing f2 can anyone advise what F 2 stands for


Hi, the F2 code on the Magic Chef Oven implies that the Oven temperature is too hot.
The solution is to replace relay board, if present, or oven temperature sensor (RTD). Check sensor harness...

Oct 09, 2010 | Magic Chef Ovens

1 Answer

Range won't heat up


it is a glow coil , thermocouples are on units with a free standing pilot that you have to light, if you have a range like this you may need a thermocouple if not a free standing pilot you have a electronic gas iginition system that uses a glow coil, you turn on over setting and oven glows orange then iginites if this is what you have you need new glow coil, easy to repalce

Feb 03, 2010 | Magic Chef 9122 Gas Single Oven

2 Answers

I have a Magic Chef Chateau Gas range. The upper oven does not heat properly. It comes on, but never gets up to operating temps.


you could have a bad ignitor check that it is actually igniting the gas and you can see flame, also check the cavity sensor a probe that sticks into the oven at the top usually on the left top corner but if the bake cycle works with good results them it is ok
check for flame when it starts give it a mibute to ignite, if it does not then you need to replace the broil ignitor.

Sep 19, 2009 | Ovens

1 Answer

Gas smell oven does not light


you may need new coupler on pilot system

Jun 23, 2009 | Magic Chef 9122 Gas Single Oven

1 Answer

Propane not getting to oven... stove top works fine..


The pilot light must be lit and stay lit before you will have any propane coming into the oven. This is a safety feature.

May 17, 2009 | Magic Chef 9122 Gas Single Oven

1 Answer

Oven wont heat


That depends if the oven is electric or gas.

If it is electric, it can be heating element, temp probe, or control knob/buttons, board and wiring.

If it is gas it can be the igniter (check spark) , the thermostat, the safety valve that prevents accidental gas flow, or the control.

If the oven has self cleaning cycle, check that it is not stuck on self cleaning, try unplugging for a while and restarting self cleaning cycle in that case.

Check also What is wrong with your Range/Stove/Oven?


Mar 29, 2009 | Ovens

1 Answer

Top of stove hot when oven on


I suspect this may have been happening for quite some time and you may never have noticed it. MANY ovens vent near one of the stove eyes. If you lift the cooktop for 'servicing', I bet you see the little vent. It is usually in the back right underneath the cooking surface. Check to make sure it is not blocked, clogged or has rusted out/off.

Mar 04, 2009 | Magic Chef 9815 Electric Single Oven

2 Answers

MAGIC CHEF TIME SAVOR GLASS TOP


Hi - Please post the model number of you appliance, it will look something like CEC1536.

Thanks.

Jul 02, 2008 | Magic Chef 9512 Electric Single Oven

Not finding what you are looking for?
GE JGRP17 Gas Single Oven Logo

363 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...