Question about Konica Minolta bizhub C250 All-In-One Laser Printer

1 Answer

Bizhub 350 error code c2557 - Konica Minolta bizhub C250 All-In-One Laser Printer

Posted by Anonymous on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Konica Minolta Master
  • 6,161 Answers

Might want to have the developer replaced and drum/cleaning blade normally done all together, then run the F8 procedure and make sure the counters where cleared. Did you recently replace the drum and the developer if so did you clear the counters for the drum and developer, FIRST? IF not then the copier thinks the new drum and new developer are old. The copier works on the counters that is how it knows it got a new drum and developer. Get new developer and a new drum and have it installed correctly. Counters are clear before the unit is yanked out of the machine, then you remove the image unit/drum unit replace the developer/drum and cleaning blade. (DO NOT USE A VACUUM CLEANER WHEN REPLACING THE DEVELOPER static electricity can destroy the sensor located below the developer unit. Then reinstall and RUN F8. Make sure the fax line and Ethernet cable is removed can't print anything until the F8 is run. Or you will start all over again with new developer and a new drum.

Posted on Dec 30, 2015

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 19 Answers

SOURCE: bizhub 350 error code

c3852 means low fuser(hot section) temp setting. hold down utility or stop key, then you should be abel to do trouble reset. if problem persist it would most likely be a lamp or a sensor, which will require a technician to come out.

Posted on Apr 16, 2008

  • 12 Answers

SOURCE: Our bizhub-250 receives a C2557

hi,

open and close front door cover to reset error.

If it persists you have to execute (TCR Toner SUPPLY)

Tell me if you need to execute it.

Bye.

Posted on Mar 20, 2009

  • 1 Answer

SOURCE: BizHub 250 Malfunction Code C2557 - HELP!

I can even reach the "service mode".
The screen shows the error (c2557) and I can not access to anyother function.

Posted on Oct 01, 2009

  • 8 Answers

SOURCE: Bizhub 350 error code c2557, how can i fix this?

This code happens if you replace drum without replacing developer. Both must be replaced at same time.

Posted on Oct 22, 2009

hamzaskilltd
  • 316 Answers

SOURCE: Solution for error code c2557 konica minolta bizhub 250 machine

ADTC sensor failure

Posted on Aug 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I solve c2557 error ?


Hi
I found your error code and suggested remedies here:
Error Codes Konica Minolta bizhub 250 Code C2557
This site is very useful as by changing the drop down menus along the top of the page you can view other errors for your machine and for other models and makes. You can also use the link to get a pdf format Service Manual for your machine.
Hope this is helpful, if so would you please register that with Fixya
Cheers

Feb 09, 2015 | Konica Minolta bizhub 250 All-In-One Laser...

1 Answer

How to reset error code c2557


replace k iu and developer /open close the front door but it will be back until you replace the parts

Jul 03, 2014 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Error C2557


ATDC sensor error code.You must need replaced a developer.Before replacing reset the special parts counter(I/U life,developer)

Dec 01, 2013 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Error code f-26-3


the bizhub 222 typically does not not throw this error code this is an error code is for one of the older konicas and is a toner density error code check developer/ developer unit
if this is a bizhub 222 the toner density error code would be c2557

May 10, 2012 | Konica Minolta Bizhub 222 Black and White...

1 Answer

We keep getting an error message c2557 for the bizhub 350. what does this mean? we have a tech out and he cant help us


this code means that the time has come to replace its parts, i mean some parts of imaging unit.its the code of a sensor.

May 26, 2010 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

My Minolta Bizhub-200 prntr. has a C2557 error code. How do I clear it?


Hello,
moz-screenshot.pngmoz-screenshot-1.pngC2557 - Abnormally toner detected black tcr sensor.

Reinstall image unit black
Reinstall toner cartridge
Change Image unit
Change toner carridge.

Jan 09, 2010 | Konica Minolta Bizhub-200 Minolta Printer

3 Answers

Bizhub 350 error code c2557, how can i fix this?


This code happens if you replace drum without replacing developer. Both must be replaced at same time.

Sep 30, 2009 | Konica Minolta bizhub 350 All-In-One Laser...

2 Answers

Konica/Minolta biz 350 C2557 after replacing DV unit and drum F8


tha minolta di3510 developer unit looks the same as the unit for the konica minolta bizhub 350 but the toner sensor in the minolta unit uses a different voltage range for the toner sensor and it will throw this code make sure you have the correct unit for this machine also you can try this
go back into tech rep mode and change these settings:
select tech rep choice mode
select printer tab
select atdc sensor gain
set the value to about 165
then back all the way out to the ready screen and power the machine off then back on and replenish toner in the user management screen.

Apr 22, 2009 | Konica Minolta bizhub 250 All-In-One Laser...

1 Answer

Our bizhub-250 receives a C2557


hi,

open and close front door cover to reset error.

If it persists you have to execute (TCR Toner SUPPLY)

Tell me if you need to execute it.

Bye.

Mar 05, 2009 | Konica Minolta bizhub 250 All-In-One Laser...

Not finding what you are looking for?
Konica Minolta bizhub C250 All-In-One Laser Printer Logo

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Ben
Ben

Level 2 Expert

108 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...