Question about Sewing Machines

Open Question

Singer 591 foot won't come down - Sewing Machines

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 136 Answers

SOURCE: Needle direction on an industrial singer machine

down

Posted on Sep 27, 2009

  • 36 Answers

SOURCE: I purchased singer 591 from a commercial manufactu...

A 591 is a flat bed industial machine, that came out with a clutch motor. Unless it has been changed to a servo motor. A clutch motor when turned on will will spool up to speed and you will hear it run. A servo motor makes no sound until you move the foot leaver.
If you hit the switch and nothing happens even when you move the foot feed, check your electical connections.

Posted on May 23, 2010

  • 1564 Answers

SOURCE: the pressure foot handle is loose and my foot won't go down what's wrong

Grasp the presser foot bar and pull it down. It is likely that the loose bar has jumped off of the cam on the lever. you'll need to figure out how to get in there and tighten it or replace a broken lever.

Good luck.

Posted on Oct 11, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have error C7 on singer one plus and it wont sew at all?


I was getting a C7 error on my Singer Heritage sewing machine every time I pushed the pressure foot. I decided to see if the reverse sewing button would work and it did. Then I pushed the pressure foot to sew again and it worked. Hope this helps someone else.

Jan 27, 2013 | Singer Sewing Machines

1 Answer

The pressure foot handle is loose and my foot won't go down what's wrong


Grasp the presser foot bar and pull it down. It is likely that the loose bar has jumped off of the cam on the lever. you'll need to figure out how to get in there and tighten it or replace a broken lever.

Good luck.

Oct 11, 2012 | Singer 9900

1 Answer

I have a 9960 singer machine and am trying to use the buttonhole presser foot for the first time and I can not get it to sew T


the buttonhole foot snaps on to the presser bar, there's a little lever at the back of the presser bar that releases the foot, then put the buttonhole foot down on the needle plate & use the presser foot lifter (number 11) to lower the presser bar down onto the buttonhole foot & you'll hear a click sound when it snaps on & make sure to use the buttonhole lever(number 31) because the machine won't sew a buttonhole unless that lever is pulled down.

Apr 26, 2012 | Singer Sewing Machines

1 Answer

I was free motion quilting, machine stopped. Beeps three times when I push foot pedal and won't sew


Hi there,

Check your buttonhole lever, left back of the machine. Pull it down and push it right up into the machine. Should solve your problem

Sep 06, 2011 | Singer Confidence 7467 Mechanical Sewing...

1 Answer

1) The lever at the back that keeps the foot up when threading etc will not stay up on it's own. When you put it up, it just falls bak down a second later. 2) The needle won't go up and down,...


it sounds like the take up lever has either come loose or is broken, & since the needle won't go up & down it needs to be checked

Aug 02, 2011 | Singer 1507

1 Answer

I purchased singer 591 from a commercial manufacturing comp. About 3 years ago for my fiance to use. She doesn't need it anymore so I'll sell it. Thing is I can't turn this machine on to show potential...


A 591 is a flat bed industial machine, that came out with a clutch motor. Unless it has been changed to a servo motor. A clutch motor when turned on will will spool up to speed and you will hear it run. A servo motor makes no sound until you move the foot leaver.
If you hit the switch and nothing happens even when you move the foot feed, check your electical connections.

May 19, 2010 | Singer Quantum XL-5000 Computerized Sewing...

2 Answers

Have Viking 150E


I have to buy a walking foot for the Viking. Or get another Singer since the foot waqs originally for it and themachine died permanently.

Oct 12, 2008 | Husqvarna Sewing Machines

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...