Question about Konica Minolta bizhub 350 All-In-One Laser Printer

1 Answer

Error code c-3423

I reset this error code and all my machine says is Trouble reset, with an arrow pointing down to ok. Nothing else is happening

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Konica Minolta Master
  • 6,161 Answers

That is GOOD did you touch the trouble reset, yes then power off and turn on should be go to code if the code comes back then replace the the code does not exsit in the service manual what is the code C-34??????

Posted on Dec 30, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a konica minolta bizhub C454e I want to insert the IP but when I enter the administrator option I can not find the Network Settings ... what can I do?


You can try trouble reset.
First you need to switch off the copier, then hold the yellow reset button and then whilst holding it power up machine. Hold reset until you get white screen with trouble reset in middle. Now tap on the trouble reset button and it hould point down an arrow saying OK. Now shut down the machine again and leave it off for at least 10 seconds. Boot up machine and try to access the network settings.
If this doesn't work then you may have to call a service engineer to reset it in Service mode.

Sep 23, 2017 | Konica Minolta Office Equipment & Supplies

1 Answer

Xerox error code


Try this:
Enter Service mode:
1. On the Control Panel, press the Down Arrow button to select
Troubleshooting and then press OK.
2. Press the Down Arrow button to select Service Tools, and then press
OK.
3. While pressing and holding down the Up Arrow button, press the Down
Arrow button to display the Hidden Service Menu.

Select Reset Error Log
Reboot the machine? Yes
Wait for about 15 min.
Should be all right after that.

Last time did work just fine for me!
If don't work mail me at:
innovaprinters@hotmail.com or
impressaodigital.poa@hotmail.com

And we try something else.

Jul 22, 2014 | Xerox Corporation Xerox ColorQube 8570DT...

1 Answer

How to do a trouble reset


turn off the machine then hold utility counter down turn the machine on in the upper right hand corner of the touch screen you will see a black dot that means you can let go of utility counter then it takes you too trouble reset hit it it will have an arrow that points down to ok reboot machine

Jun 04, 2014 | Konica Minolta Bizhub 283 Copier

1 Answer

How can i fix the problem for error code c-3423


If after this procedure the code comes back replace the fuser unit continue reset the fuser will catch on fire that will ruin a perfectly good day

1. Turn OFF the power switch.
2. Turn power switch ON while pressing the Menu/Select key.
3. Check that the Trouble Reset screen appears.
4. Press the Menu/Select key.
5. Check to make sure that [Completed. Please turn power OFF and ON.] is displayed
and the it has been reset.
6. After turning off the power switch, turn it on again more than 10 seconds after and check if the machine starts correctly.

May 06, 2014 | Konica Minolta magicolor 8650DN All-In-One...

1 Answer

Bizhub 283 trouble code 3423


if after this procedure code come back replace the fuser, attempt again machine my catch on fire that would ruin a perfectly good day

1.
Turn OFF the main power switch.
2. Turn main power switch ON while pressing the Utility/Counter key.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the main power switch, turn it on again more than 10 seconds after and
check if the machine starts correctly.

Apr 17, 2014 | Konica Minolta Bizhub 283 Copier

1 Answer

I have photo copy machine modle konicaminolta the screen show trouble code 3423 how can fix


1.Turn OFF the main power switch.2. Turn main power switch ON while pressing the Utility/Counter key. (Control Panel ON/OFF must be ON)
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed and the it has been reset.
5. After turning off the main power switch, turn it on again more than 10 seconds after and check if the machine starts correctly.

IF THE CODE COMES BACK DO NOT !!!!! RESET AGAIN THE FUSER IS THE PROBLEM IT CAN CATCH ON FIRE AND THAT WILL RUIN A PERFECTLY GOOD DAY GET A TECH OUT TO LOOK AT THE FUSER

Dec 27, 2012 | Konica Minolta Minolta Bizhub 223 Copy...

1 Answer

Como vou resolver o erro C 3423 da Konica Minolta bizhub c253


Its a fuser code. To reset it the code and get it to work again.
1)Turn the main power off ( the switch behind the toner door )
2)Hold down the Utility button while you turn the machine back on.
3)Keep holding till you see "Trouble reset"
4) Push trouble reset then turn off and on the machine and will start working

Sep 06, 2010 | Office Equipment & Supplies

3 Answers

I have a ricoh aficio sp c420dn, when and turn on the screen showing error sc542


You may try first to reset the SC 542 before calling a technician!

That you can do by following method:

1.Turn the machine off and then after 5 second turn it on while pressing the “On Line” key and “Escape” key together until “SYSTEMver x.xx/1. Service” shows on the display.
2.Use the “Up/Down arrow” keys to scroll through the menu listing.
3. Press the (OK) key while
on the display writes " 2. Engine " .
4.go to "[5810 001] - Fusing SC Reset" by scrolling the “Up/Down arrow” keys and press the [OK] key (on the display should write execute or done) press [OK] again if is needed to press it.
5. After this turn off and than after 5 second turn it on the machine.
Please do not change nothing else in this menu only reset the fusing unit SC code, because if you change some other values and settings you might to regret that and pay high price for that.
So only reset the Fuser SC code SC542 by the upper mentioned method and do nothing else, if the SC code appear again then do not try this again because you might burn some parts.
If this do not help than call the technician.
Please answer do this is helpful for i to know do the problem was solved.
Regards

Jan 10, 2010 | Ricoh Office Equipment & Supplies

2 Answers

IT KEEPS DISPLAYING ERRO C3452 ONLY. THAT ERROR IS DETECTED BY THE MACHINE I SHOULD PLS CONTACT MY TECHNICIAN.


this is a low fuser temerature code you can reset it by the following method:
1. on the right side of the machine there is a small cover you can remove next to the network card it just clips on pull down on the small lever and pull it down
2. once the cover is removed you will see a connector and a small hole with a switch in it to the right of the connector push the switch with a small object like a ball point pen.
3.when a small dot appears on the touchscreen hit the number 3 on the number pad.
4.enter the 8 digit service code which is 00000000 and touch end.
5. select trouble reset to reset the error code.
if the error code reccurs you will need to replace the fuser unit but i have seen the machines show this error when they are turned on while the room temp is cold first thing in the morning.

Nov 12, 2009 | Konica Minolta bizhub 350 All-In-One Laser...

3 Answers

SAGEM MF 5461 HSYNC printer error and Fuser Temp error


SAGEM 5401 / 5461 “PRINTER ERROR FUSER TEMP”
According to SAGEM this fault is caused by an incorrect operation of the fuser unit – the
machine did not heat up in time.
Solution:
Follow the keystrokes set out below, do not worry about what is on the display unless
stated to check. All letters referred to are for the keys on the alpha key pad to the right of
the control panel, under the plastic flap.
For the 5461:
Press down arrow, *, #, ok, 1, ok, stop (red button),
Press down arrow, #, T.
The machine returns to the error code. Switch the machine off for 10 seconds, switch
back on. If successful the machine will warm up and come ready.
Press down arrow, *, #, 0 (ZERO), ok, stop.
For the 5401:
Press down arrow, *, #, ok, 1, ok, stop.
Press down arrow, #, look on the display, press up arrow until “T>>PRINTER” is
displayed. Press ok. The machine returns to the error code. Switch the machine off for 10
seconds, switch it back on. If successful the machine will warm up and come ready.
Press down arrow, *, #, ok, 0 (ZERO), ok, stop.
If this is a recurring problem the firmware on the board may need to be upgraded, or there
is a physical fault with the fuser unit. Low voltage / power surges in the supply power to
the machine may also play a part in the occurrence of the error.
The firmware needs to be version 1.10.
To check the firmware version do the following:
5461:
Press down arrow, *, #, ok, 1, ok, stop.
Press down arrow, *, W
Firmware version is displayed. Press stop to clear screen.
Press down arrow, *, #, ok, 0 (ZERO), ok, stop.
5401:
Press down arrow, *, #, ok, 1, ok, stop
Press *
The trace lists will be printed, firmware version is after PRT, as in example below.
In this example, the printer firmware is: PRT V 1.5
It is older than V 1.10 and the printer firmware need to be upgraded.
The firmware can only be upgraded at Copy Type Electronics or at SAGEM in France.
Therefore the entire machine will have to be returned to us for the upgrade.

Feb 24, 2009 | Minolta Office Equipment & Supplies

Not finding what you are looking for?
Konica Minolta bizhub 350 All-In-One Laser Printer Logo

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Ben
Ben

Level 2 Expert

108 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...