Question about Gateway Belkin 54g Wireless DSL/Cable Router (DHF5D72304)
S2s 192.168.2.1 cannot be displayed
Posted by Anonymous on
Few things you can try. First would be to do a factory reset. Do this by pressing the reset button for at least ten seconds. If that doesn't work you could try switching ethernet ports.
If that doesn't work your router is probably dead.
Posted on Aug 03, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
To access in your router, open a blank Browser page and type :
http://192.168.2.1 normally it's this ip :)
(note that A lot of routers setup pages are accessed through [192.168.1.1]).
username : Admin and at password leave it blank otherwise Type : admin
Posted on Oct 15, 2009
when you change the wireless security on the router , it is recommended tht you will change the wireless network name also ( SSID ). Because when you try to connect to the wireless network on the computer, your computer will try to connect to the same old network name with the old wireless security settings. To avoid this you can change the wireless network name. WPA is supported by windows XP SP2 and above operating system.
If the operating system on your computer WINDOWS XP SP1 and if you are trying to connect using the windows utility then you would not be able to connect to the network .
Click Here for more information about the routers and networking
Posted on Jan 29, 2010
SOURCE: belkin 54g wireless router
To reset your router to default settings, hold down the reset button for 10 seconds and realese it. Then unplug the power cord and plug it back in. This should work with most routers.
Posted on Feb 13, 2010
SOURCE: I need to secure my
WIRELESS SECURITY ISSUES
Step 1 : Connect Router - Computer ( Wired)
Step 2 : Open Router Setup by typing http://192.168.2.1 on the address bar of internet explorer
Step 3 : On the left under wireless click wi - fi protected setup
Step 4 : Leave the password blank and click on submit
Step 5 : Disable it and Click on apply changes
Step 6 : On the left under wireless click Security
Step 7 : Enable 64 Bit WEP
Step 8 : Type a 10 digit number on the key 1 ( 2 in each box )
Step 9 : Click apply changes
Step 10 : on the left under wireless click channel and SSID
Step 11 :Change the Wireless channel to 6
Step 12 : Change the SSID to a different name ( no Spaces )
Step 13 : Click apply changes
Step 14 : Now Scan and connect to this network ( Wireless )
Let me know if it works
Posted on Jan 15, 2011
Tips for a great answer:
Dec 26, 2012 | Belkin (54G F5D7230UK4) Wireless Router
Feb 23, 2010 | Gateway Belkin 54g Wireless DSL/Cable...
Jan 12, 2010 | Gateway Belkin 54g Wireless DSL/Cable...
Dec 20, 2009 | Gateway Belkin 54g Wireless DSL/Cable...
Nov 01, 2009 | Gateway Belkin 54g Wireless DSL/Cable...
Oct 15, 2009 | Gateway Belkin 54g Wireless DSL/Cable...
Oct 06, 2009 | Gateway Belkin 54g Wireless DSL/Cable...
Jul 10, 2009 | Gateway Belkin 54g Wireless DSL/Cable...
May 22, 2009 | Belkin (54G F5D7230UK4) Wireless Router
Jun 10, 2013 | Gateway Belkin 54g Wireless DSL/Cable...
88 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: