Question about Gigabyte GA-945GZM-S2 Motherboard

1 Answer

GA-EP43-UD3L Having problems installing motherboard. Will not boot. Phase Led lights flash on then off. Help

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 42 Answers

CLR_CMOS (Clearing CMOS Jumper) (next to the battery)

Use this jumper to clear the CMOS values (e.g. date information and BIOS configurations) and
reset the CMOS values to factory defaults. To clear the CMOS values, place a jumper cap on the
two pins to temporarily short the two pins or use a metal object like a screwdriver to touch the two
pins for a few seconds.
• Always turn off your computer and unplug the power cord from the power outlet before
clearing the CMOS values.
• After clearing the CMOS values and before turning on your computer, be sure to remove
the jumper cap from the jumper. Failure to do so may cause damage to the motherboard.
• After system restart, go to BIOS Setup to load factory defaults (select Load Optimized
Defaults) or manually configure the BIOS settings (refer to Chapter 2, "BIOS Setup," for
BIOS configurations).

Posted on Jun 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On Startup Get Continuous short alarm beeps


hiya

sounds like either the ram is faulty or wrong ones inserted either way remove them try booting the motherboard with out them if this cures the problem replace with new ones

hope this helps


John

Oct 30, 2011 | Gigabyte GA-EP43-UD3L Motherboard

1 Answer

Problem with the Gigabyte GA-EP43-UD3L Motherboard Continuous short beeps on power up.Then shuts down


Trying to help you, please clarify me if the beeps are short or long ones, or some (how many) shor followed by some (how many) long ones. Don't worry, leaving the computer at "beeping mode" won't hurt it. Sorry for the details but these kind of codes identify if it's a motherboard, or CPU, or memory error.

Waiting clarification, don't hesitate to post.

Thanks and regards
Please kindly rate this solution
Stelios
direct FixYa link: http://www.fixya.com/users/technical114

Oct 02, 2010 | Gigabyte GA-EP43-UD3L Motherboard

1 Answer

I bought a ep43-ud3l mobo that I installed with windows, after moving some files from my old hard drive windows became corrupted , boot up resulted in BSOD, erased windows bsod, formated HD BSOD, removed...


pls check the cpu compatibility. one time I tried to install 64bit , but could;t install. 32 bit was ok. check the video adapter and remove it and try it with on board vga

Jul 17, 2017 | Gigabyte GA-EP43-UD3L Motherboard

1 Answer

Error "boot manager not found. restart " keeps cycling this. Just installed


Probably no operating system on the hard disk (or the Master Boot Record is corrupt).

Nov 20, 2009 | Gigabyte GA-EP43-UD3L Motherboard

1 Answer

EP43-UD3L Sound problem


you will need to download the newest drivers for your motherboard, make sure you download the right ones for your operating system. I used to go to the manufacturer's website to do this all the time but now i'm lazy and i just google: (motherboard model) drivers download. By the way i don't ever mess with disks anymore because its bound to be outdated by the time you get it.. they make good coffee mug coasters though.

example: Gigabyte EP43-UD3L sound download
http://www.google.com/search?hl=en&client=firefox-a&rls=org.mozilla%3Aen-US%3Aofficial&hs=AMT&q=Gigabyte+EP43-UD3L+sound+download&aq=f&oq=&aqi=

Oct 29, 2009 | Gigabyte GA-EP45-UD3L Motherboard

1 Answer

GA-EP43-UD3L Reboots while loading Windows


its due to bios problem , upgrage bios from biostar web

Oct 26, 2009 | Gigabyte GA-EP43-UD3L Motherboard

1 Answer

Flashed bios wont boot ga-ep43-ud3l


Hi,
Seems like your bios update failed, was corrupt, wrong version or was interrupted.

It's very difficult to recover from a failed bios flash , but if you are lucky you can try clearing cmos then take the battery out overnight. Then reinstall battery and do a HARD BOOT.

If that does not work try this site and read recent comments.

http://ask-leo.com/flashing_my_bios_failed_how_can_i_recover.html

Good luck,
Hank

Jul 22, 2009 | Gigabyte GA-EP43-UD3L Motherboard

3 Answers

The phase 4 led on my gigabyte ep43-ud3l ights up


hi..the mother is need a complete the supply on board pin..then double cheek the memory..thanks..Good Luck...^_^

May 13, 2009 | Intel Motherboard

Not finding what you are looking for?
Gigabyte GA-945GZM-S2 Motherboard Logo

1,178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gigabyte Computers & Internet Experts

David
David

Level 3 Expert

778 Answers

Tony

Level 3 Expert

2600 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Are you a Gigabyte Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...