Question about BL2028: BedLocker Tonneau Canisters

1 Answer

Bedlocker won't open

I have an OLDER Pace Edwards Bedlocker and the motor won't work.

Posted by on

  • 5 more comments 
  • Pete Culver
    Pete Culver Apr 23, 2014

    The motor is inaccessible on my unit without completely removing the entire unit from my truck

  • Pete Culver
    Pete Culver Apr 23, 2014

    I do NOT have the manual operation lever on my unit. I have no idea how or even IF I can operate the blanket manually

  • Dennis
    Dennis Apr 23, 2014

    According to the installation instructions, there IS an emergency release. "You will need to gain access to the release handle located

  • Dennis
    Dennis Apr 23, 2014

    "You will need to gain access to the release handle located on the driver side of the canister at the front of the truck bed. Once you have access to it, pull the handle out away from the canister and pull out the handle kickstand behind it."

  • Dennis
    Dennis Apr 23, 2014

    You can d/l a copy of teh installation instructions here:

  • Dennis
    Dennis Apr 23, 2014

  • Dennis
    Dennis Apr 23, 2014

    I would imagine that you will need to drop the tailgate, and crawl up into the bed under the cover to release the realse handle. (Get your son, son-in-law, neighbor kid, etc. to do it. :-)


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 126 Answers

I read on another forum where they had a problem with some of their Brake Mechanisms failing.
"Easy fix. Just take 3 screws out from the side of the motor and the unit comes right off. The brake is added so that the bedlocker stays locked in-place once the pressure sensor shuts off the motor. Without it, the cover may activate with vibration of the moving vehicle."
You could also contact Pace Edwards at
& see what help they could offer.

Posted on Apr 23, 2014

  • 2 more comments 
  • Dennis
    Dennis Apr 23, 2014

    BTW, did you check the fuse?

  • Pete Culver
    Pete Culver Apr 23, 2014

    getting power to the entire unit. Even put a new fuse in the remote mechanism. You can hear it "click" but that's all. I have an older unit with NO release handle

  • Dennis
    Dennis Apr 24, 2014

    At this point I would call Pace-Edwards at (800) 338-3697 and see what they would advise. (6:30 - 4:00 PST.)

  • Pete Culver
    Pete Culver Apr 25, 2014

    Working with Pace Edwards right now... I'll post back if I find a solution


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why does my older dog pace all the time?

Some information for you

Dementia and anxiety in your older dog - What you can do ... Feb 1, 2010 - I had to do this with my old dog Jake and it actually ended up with us both ..... He doesn't pace through the night, but he does start early (around ...

Pacing & Circling in Dogs - Pets > Dogs > Dog Health And indeed this behavior does suggest something is very wrong. ... It's distressing to watch your dog pace and circle relentlessly. ... Cushing's disease is a common endocrine disorder in older dogs caused by an excess of the hormone cortisol.

The Special Needs Of Old Dogs - 2nd Chance Most older dogs do best when they receive several small meals a day rather than one or two. ... Does My Old Dog Need A Supplement ? .... They may pace endlessly, vocalize, walk in circles, loose their housetraining and ability to interact with ...

Why does my 16 year old dog pace so much? ' Yahoo Answers Mar 2, 2008 - Best Answer: A couple of things - or a combination of things. Old dogs tend to lose their sight and hearing, so they can't really tell what's going ... Why does my dog pace and whine around the house? 14 Sep 2011 Why does my dog circle and pace constantly? 9 May 2010 Why does my dog pace around the house? 21 Nov 2009 Why does my dog walk around in circles? 15 Nov 2007 More results from

Jan 25, 2016 | Miscellaneous

1 Answer

Pace saver iii repairs

Make sure the battery is properly charged. A discharged battery will light up the lights but do nothing for the motor.

Jul 16, 2015 | PaceSaver Plus III Titan 3 Wheel Travel...

1 Answer

Chevy idle problems

Biggest problem that I have found with these motors concerning idle is a dirty throttle body plate. Get some carb cleaner open the butterfly, spray it grab a rag and clean out as much of the black residue you can. Don't spray to much Down intake. May backfire. You can spray the rag down and work it back and forth. Hope this helps

Nov 15, 2013 | 1997-2000 Chevy Colorado Utility Rig Rack...

1 Answer

Washer wont cycle

Number 11 is your lid switch. It is very easy to repair. To test it watch the video.
Older models would wash with the lid open but not spin. This later model washer won't wash or spin with the lid open so I suspect you have a broken lid switch. IF that turns out not to be the case then I would next check the motor start capacitor. When these fail the motor won't work at all.

On your machine you gotta have a long skinny screwdriver . On the back side of the washer you back out a screw on each side and then she pops up.
I gotta whole page of stuff on these washers HERE

Nov 01, 2011 | Estate TAWS850PQ

1 Answer

My Toro Personal Pace 22"

pull your spark plug and see if it will pull then, if so then it is hydro locked with fuel which can be caused y a bad fuel cap, not venting or a stuck open needle in carb causing gas to flood cylinder

Jul 27, 2011 | Toro Lawn Mower With Toro Power Tools

1 Answer

I have installed a pace Edwards jack rabbit roll up toneau cover on a 07 tundra. The mounting clamps are attached at the front of the rail near the canister and about 8" from the tailgate. The problem...

As you may be aware, the knob has to be rotated to pull in the latches so you can open the top. When you pull on the strap to close the top, I releases the latches so they will stop at the 1 ft intervals.

1. Make sure that when you pull on the strap, you see the knob pop back to the lock position (handle going side to side) If it stays in a front to back orientation, the strap is not pulling on the latch release.
2. On either side of the roll top, there is a plastic block that keeps the latch bars in place. If one of the screws falls out, you will lose control of the latch on that side so it no longer locks the cover at any of the intervals.

I've had a jackrabbit cover for the past 8 years and I've only had a couple little issues related to the latching. The things i indicated are what I found to be the problem at different times.

Nov 25, 2010 | Edwards Furniture Pace Edwards Roll Top...

Not finding what you are looking for?
BL2028: BedLocker Tonneau Canisters Logo

Related Topics:

544 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pace Edwards Vehicle Parts & Accessories Experts

Richard Petch

Level 1 Expert

18 Answers

 Brian Main
Brian Main

Level 3 Expert

424 Answers

Chuche Vargaz
Chuche Vargaz

Level 1 Expert

28 Answers

Are you a Pace Edwards Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides