I clean up my pc and now im trying to install the westell and i dont know how

Try to install software from manufacturer website...
May be your installed software are not compatible with your router..

Try typing either 192.168.0.1 or 192.16.1.1 in the address bar of your web browser.

Installation CD = Your Westell may or may not come with installation software. It's not normally necessary
It depends on Your ISP

Hi,

What are your tying to install in your system? What hardware did you insert to your pc?

Please provide more details so we can help you better.

Thanks!

Default user is: admin
Default password is: password

Reset the router (hold the small button for at least 10 secs while router is on) and try above.

USB to PC is fine, make sure you have the original installation disk for it. Then you can connect the Xbox via network cable. There shouldn't be any problem as your modem can take 2 connections by the sound of it.

You will need to connect a router to the Westell in order to use more than one computer with your dsl. That modem will need to be put in bridge mode in order to allow it to work with the router.
Call ATT/Bellsouth support and tell them you need to setup your modem for bridge mode and connect your Linksys router.

hi there i went to the westell site and downloaded the drivers for mine try it if not there use the google search enging for the the device ok best regards mike

hi ,
i went through ur problem and solution according to me is when u will open the routers page by 192.168.1.1 and there u will a tab under general settings and there would be an option for MTU ...
change that to mannual and change it to 1365 .....
well that is the only possible step
>>>>>> Do remember there is no special setting for MTU .... its just a tab there .....


IF u dont find that then u can send me the options that u see there ....

run the modem to the router with Ethernet cable and then use one of the other Ethernet ports on the router and another Ethernet cable to connect desktop