Question about Whirlpool Cooktops
I have a Westinghouse PAJ 808 freestanding electric cooker with ceramic cooktop that intermittently gives off clicking noises, usually for about 4 to 10 seconds each time, sometimes longer. The electronic clock display blinks rapidly when this happens. What's causing it and how to fix?
Sometimes after a power failure the p c board needs re setting. Turn off the power for a few minutes that allows it time to re set. Turn it back on then individually turn on each element for a couple of minutes.
Posted on May 10, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Remove ceramic cooktop
grouch, kill the power to the cooktop. You are going to have to remove the mounting brackets from undernieth and push the cooktop up. After it's up from it's installation position remove the side and back screws holding the top to the botom. Remove the burner knobs and it should come apart. Sounds like you have a bad burner switch. Catriver..post back
Posted on Feb 26, 2007
Mine cracked and I ordered a replacement shipped overnight. I can't get a repair person out before Christmas. Is it easy to do it myself?
Posted on Dec 20, 2007
I have a viking gas cooktop. The ignitor on one of my front burners wouldn't stop clicking even after the flame ignited. I swapped that ignitor with the ignitor from a back burner, expecting that the problem was with the ignitor and that the back burner would start to click incessantly, but at least I'd have my favorite front burner for use. Instead, the front burner was then only clicking 50% of the time and the back burner was fine, suggesting the problem was related to the burner not the ignitor. I pulled the front ignitor a bit away from the burner and now it is working normally. Hope this helps.
Posted on Aug 18, 2008
Check to make sure your burner caps are aligned. I had this problem, and it turned out one of my burner caps was slightly askew. Putting it level fixed the problem.
Posted on Mar 09, 2010
Tips for a great answer:
Jan 01, 2015 | Cooktops
Mar 25, 2014 | GE 36 in. Profile JP968 Electric Cooktop
Mar 16, 2013 | Bosch Cooktops
Jan 02, 2012 | Dacor Cooktops
Dec 15, 2009 | Cooktops
Nov 17, 2009 | Miele CS1112E CS1000 Series CombiSet...
Nov 16, 2009 | Cooktops
Jul 02, 2009 | GE 30 in. Profile JP350 Electric Cooktop
Jan 07, 2009 | Whirlpool GJC3034 Electric Cooktop
104 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: