Question about Kyocera FS-2000D Laser Printer

1 Answer

Kyocera FS-2000D error code 7410:0002923

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 56 Answers
Re: Kyocera FS-2000D

Hi, Sound like drum unit is out off position.
Switch off printer.Open left side door, remove waste toner bottle and push drum unit(with grej lever on it) in printer to proper position.If grey lever is not in proper position, drum will be not locked.Place waste toner bottle in position.Switch on printer.

Posted on Nov 06, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a kyocera FS-2000D and an error 6000:0087166 what can I do...???

Error Code 6000 is fuser code, you need to replace the fuser unit, make sure there is no paper stucking there first!

Nov 10, 2011 | Kyocera FS-2000D Laser Printer

1 Answer

Hi, I have an ecosys fs 2000d, with a call service message 6000:0026965, somebody help me please

Call service message 6000 in Kyocera is a fuser error code. The fuser must have gone bad.


May 31, 2011 | Kyocera FS-2000D Laser Printer

1 Answer

Kyocera FS-2000D This printer comes up with error code 6120-0044336 at power on Is this a fuser error?

Yes it is a fuser error.

6120 Abnormally high fuser thermistor S temperature

*35/37 and 45/47 ppm printers (EUR/USA model) only

The temperature of the fuser thermistor S detects 250°C/482°F or more continuously for 3 s.

Shorted fuser thermistor S.

1. Measure the resistance. If it is 0 ω, replace the fuser thermistor S.

2. Defective engine PWB.
Replace the engine PWB

Mar 08, 2011 | Kyocera FS-2000D Laser Printer

2 Answers

I have a kyocera FS-2000D with error code: Call for service 0150:0000049. Help...thanks in advance

Error code 0150 is an engine EEPROM communication error. The engine board might need to be replaced. I have heard that sometimes a defective developer unit could cause this same error code. I would try swaping a develper from a working FS-2000D first.

May 20, 2010 | Kyocera FS-2000D Laser Printer

1 Answer

I have a kyocera FS-2000D with error code: Call for SErvice 0150:0000049. Help...thanks in advance

0150 is a problem with either the engine board or the EEPROM chip that sits on the engine board. If you want to do it yourself, you can open the printer up and reset the chip on the board as well as reset all of the connectors that plug into the board. Otherwise, your best bet is to call a Kyocera service technician.

Mar 17, 2010 | Kyocera FS-2000D Laser Printer

1 Answer

CALL SERVICE 6000:0115785

Error 6000: is a fuser error 0115785 is your page count. You require a replacement fuser

Apr 14, 2009 | Kyocera FS-2000D Laser Printer

2 Answers

Call service 7410:0100539 on a Kyocera fs2000d

I have heard that 7410 is a standard code meaning the drum is out of position. Seat the drum correctly and away you go.

Jan 21, 2009 | Kyocera FS-2000D Laser Printer

1 Answer

ERROR CODE 7410:0004729

Hi, switch off printer ,just open cover(door) on the left side of the machine and push Drum Unit in machine(to proper seat)
You have to hear "click" sound.Switch on printer.

Mar 08, 2008 | Kyocera FS-2000D Laser Printer

Not finding what you are looking for?
Kyocera FS-2000D Laser Printer Logo

770 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Printers & Copiers Experts


Level 3 Expert

1113 Answers

NewYork kyocera HP...

Level 3 Expert

513 Answers

Bob Wescott

Level 1 Expert

17 Answers

Are you a Kyocera Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides