Finalization in stuck in the middle and wont complete
My camera is on finalization mode and the green progress bar in half way across, the camera is grinding and making noise but hasn't completed of done anything else for at least 15 minutes???? Help can I stop this and try to get pictures off the camera. Very important Graduation pictures!!!!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To finalize the disk:
Select MENU --> then select: DISC OPERATIONS
then select: FINALIZE
then select: YES ... to go back to MENU
During the disk finalization, a progress bar is displayed. Close the MENU only AFTER the screen display returns to the DISC OPERATIONS menu
Each time you execute finalization, the disc remaining space will decrease by approximately 13 MB. If you don’t have enough room, it won’t allow you to finalize the disc.
To finalize this disc, you have to delete some pictures to make enough space. But don’t worry, before you delete those pictures, you can save them to your computer.
Find out the CDs came with your camera, refer your manual page 51 - 61 to install ‘PIXELA PTP Manager’ , connect your camera and computer with USB cable, and copy some pictures to your computer, then delete the pictures on camera side. If still not enough room, copy more and delete more. make it enough to do the finalization.
My JVC DR-MV7 will not accept any disc for playback. I insert a movie disc and it consistently rejects them. After about 15 to 20 attempts, sometimes it will stay and begin reading the disc. It also sounds like some internal components are encountering some resistance (moving parts inside?). Any ideas?
Hi, Initially I had the same problem with the finalization process. But then i took off the battery pack and connected to the mains and immediately when i switched on the camcorder again, the ' Finalize ' button was highlighted i.e enabled. I continued with the finalization process and everything was fine. Was able to playback the mini dvd on a very cheap dvd player and also on a computer.
Also be sure to put the camcorder on play mode by sliding down the switch button to mode. You immediately notice that a little green button near play will light up
first you have to plug in the camcorder using the charger then you have to make sure that the play light is on,you do this by pushing the on and off switch down toward mode then you will see the green play light come on,next push the joystick in when you go to finalize,then make sure that the word yes is highlighted in orange push set and the finalization starts..if you have any questions just call cannon and they will walk you through the steps. that is what i did......good luck!!!!!!!!!!!!!!
There's no way you can continue the finalization of the disc, the disc has been marked as finalized already, even a single power fluctuation when you are using ac power adaptor can affect the disc finalizing process, so it is better to use battery when disc finalizing
I doubt it altho I really don't know. I've put over 6000 shots through my 300 and finalized in all kinds of conditions - including bumpy roads, trams, and airplanes. I've never experienced what you described, although twice in severely bumpy conditions I had one pic on each disk with half its pixels corrupted. Sounds like there is something severely wrong. To test it you can try not finalizing and look at the pics through your USB connection.