Question about Toshiba E-Studio167 Copier
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the c44 error is an error in the fuser if you know how to take the fuser out check for toner buld up on the thermistors.. the sensors with the thin strip that presses against the hot roller gets toner build up and cant read temp properly.. you could also try turning machine off and then on whilst pressing 1 3 and * buttons together this might reset it temporarily for you.. Good Luck A
Posted on Jun 30, 2009
SOURCE: error c44 call for service
abnormality after abnormality judgment: The temperature of the fuser
roller has exceeded the range of control or does not even reach the
You can try going into (08) mode by holding 0 and 8 while turning on the copier. Once the copier starts up key in 400 and press start, input "0" and press interrupt. Try rebooting the copier, if this doesn't clear that call for service then you are going to need to get work done on your fuser.
Posted on Oct 04, 2010
Tips for a great answer:
May 23, 2016 | Toshiba E-studio 167 B & W Copier....
Jan 03, 2015 | Toshiba e-STUDIO166 Printer
Jul 08, 2014 | Toshiba e-Studio 207 Copier
Jan 04, 2014 | Toshiba E-Studio167 Copier
May 26, 2011 | Toshiba E-Studio167 Copier
Nov 06, 2009 | Toshiba E-Studio167 Copier
21 people viewed this question
Usually answered in minutes!