Question about Canon Pixma MP270 All-in-One InkJet Printer
Canon Pixma MP270 error E05
Posted on Aug 13, 2016
To fix error E05, please do as for error E04, in my case, it doesn't help and here is what I did.
1)While the printer is switched on, open the printer's head cover (not scanner cover, just pull up from the part where 'canon' is written), this will move the cartridge to the center of the printer.
2)Pull off, or remove both cartridge from its cartridge lock (place where we insert the cartridge), and let the lids (the lids that are used to lock the cartridge) remain open, or unclosed.
3)Switch the printer off, this will move the cartridge lock to the right, and it will hit the printer because of the opened lids, and move back to the center.
4)Attach both cartridges back to the cartridge lock, and close the lid. Then close the printer's head cover, switch the printer on.
5)This should reset the error, and the error E05 wouldn't be shown as before.
Hope It's resolve all Your Printer Problem,
Or Still having Problem Then follow Us For
Canon Printer Support
Posted on Apr 22, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
This error is a head pump error its worth trying to clean the head with warm water to soften any dired ink in the head if that dnt work its time to replace the head
Rgards Al "alstech"
Posted on May 25, 2009
Probably your waste ink counter. Should be cleaned or replaced before
resetting but usually you can get away with resetting once.
1. Start with printer OFF
2. Hold down RESUME and then hold down POWER
3. Release RESUME
4. press RESUME twice, then release POWER
5. let green light blink until printhead has finished moving.
6. Select functions below with RESUME, execute with POWER
0 presses - green light - Test Print (exit service for i960)
1 press - orange light - EEPROM info print
2 presses - green light - EEPROM initialise
3 presses - orange light - reset waste ink counter.
This also applies to the i550, i560, i950, i960
Posted on Sep 07, 2009
Try keeping the paper only in the bottom tray (there's a tray in the bottom) Try pulling any paper out of the top and just close that top tray. Open up the head so that u can see the ink cartridges and turn the printer on and off and maybe it will center itself again. If it's still not working (even if lights aren't red and print head wont align in the center) try manually moving the head back and forth like 18 times so you can lubricate that rail in the back that's holding it. After that, re-turn it off and on again.
Posted on Aug 02, 2010
Tips for a great answer:
Sep 02, 2014 | HP LaserJet Office Equipment & Supplies
Aug 12, 2014 | Canon PIXMA MP210 Photo All-In-One Printer
Aug 02, 2013 | Canon PIXMA MP230 Multifunction color...
Nov 25, 2009 | HP Color LaserJet 2550n printer + HP Color...
Sep 07, 2009 | Canon BubbleJet i560 InkJet Printer
Apr 27, 2009 | HP Color Laser 2550N Printer
Jan 26, 2009 | Canon SmartBase MP360 All-In-One InkJet...
458 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: