Question about Epson Stylus Photo R2400 InkJet Printer

2 Answers

How to replace an Epson R2400 power supply?

The fuse on the power supply board has blown and a replacement blew at power up even before swith was turned on

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

If the fuse is blowing as soon as the power supply is connected to mains, I would check to see if any components of the power supply have failed in such a way that it would cause a short.

And for replacing it is it internal and external? I googled and getting mixed answers so will answer both. If its external I would find a power brick rated for the same specs as the original and if the connector is proprietary, rig it to the new one.

If Internal it looks like you can probably buy them from china for around $60 or find which component is causing the fault. Sign in China com Online Wholesale for AD Signage Product

Posted on May 04, 2014

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Habit-Forming:

    Visited the website for 3 consecutive days.

  • Expert
  • 245 Answers

Replace adapter cable only, do not replace the power supply by your own ! tTake it to the nearest vendor representatives

Posted on Apr 22, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung PN51d7000ffzxa Plasma Screen does not power on, Power light blinks RED


if the power supply is a new one and you follow the steps described,ther`s no doubt,the main board is bad. good luck! from Mexico City.
25382039-crrnmqnqs2ucyeabzojnkgwz-5-1.jpg

25382039-crrnmqnqs2ucyeabzojnkgwz-5-3.jpg

25382039-crrnmqnqs2ucyeabzojnkgwz-5-6.jpg

Jan 24, 2015 | Samsung Televison & Video

1 Answer

Model#DP19241. Where is fuse or circuit breaker?


It is at its main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit; before replacing a fuse; if found blown out. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Jul 02, 2013 | Sanyo Televison & Video

1 Answer

I have a Syntax Olevia 20HVK, we had a brown out and the tv went out. I opened the tv and found a blown fuse in the power supply, I replaced the fuse and the fuse blew again. should i just replace the...


you have shorted power transistor or mosfet on power supply that need to be replace however this need a soldering skills and electronic background if you don't have skills its better if you replace the whole power supply board.

Nov 03, 2012 | Televison & Video

1 Answer

Coby 40 LCD flatscreen. Went dead after 2 months. Power supply circuit board fuse [6.3a/250v] is blown. Tried a jumper with a 7 amp and it blew right away. Direct short someplace in the components of...


Your TV's manufacturer support page(s):
http://www.cobyusa.com/?p=support

Solution #1 - exercise the manufacturer's warranty - www.cobyusa.com
or even (possibly) the return policy of the point-of-sale store - find your receipt.

Solution #2 - replace the entire power supply as a unit, rather than debug the (analog
electronics = differential calculus of electronic engineering). analog electronics of the
power supply

Solution #3 - if solution #2 unavailable, desolder each suspected component of the power
and individually test components, until the culprit is identified, then replace it.

Feb 15, 2011 | Coby TFDVD1550 15 in. TV/DVD Combo

1 Answer

My epson printer R290 has no power after i reset it,even i try to turn it on many times but still no power at all..please help me to fix this problem.


Failurre of the power supply .This is Switch mode Power Supply unit and it ispossible that the fuse blew off. But if replaced fuse blows then the surrge protector, the recifier, the filter main capapcitor or the OSC IC/ driver can be defective.
Check for spares or replace as a whole unit.( it is plug and push unit and can be DIY)

Aug 30, 2010 | Epson Stylus R290 InkJet Printer

1 Answer

Epson R2400 will not turn on. Green light will not come on. Tried different outlets.


try to unplug then replug the power cord. if it fails your power supply might have already been damaged and most likely need a servicer to replace it

Sep 12, 2009 | Epson Stylus® R2400 InkJet Printer

2 Answers

No power on 2002 Mitsubishi VS-60609


You have a short in the power supply or high voltage. You will need a sevice tech to deal with that problem. Make sure to get an est before repair

Jun 19, 2009 | Mitsubishi VS-60609 60" Rear Projection...

1 Answer

Blown Mains Fuse


You should repleace the old transformer with the new one

Jun 13, 2008 | NAD C370 2-Channel Amplifier

1 Answer

Epson Stylus cx5000 - no power


If you have already tried different, USB cable, different power cable, different USB port you may even go as far as trying it on a different computer and if for any unfortunate circumstance you're still experiencing the same thing chance are its already a broken fuse or broken board on printer. Unfortunately this is a non-user replaceable part. I suggest that you contact Epson support if you printer is still under warranty from the date of purchase they may send you a replacement (brand new or refurbished) otherwise they'll be referring you to a service center in you area.

Apr 14, 2008 | Epson Stylus CX5000 InkJet Photo Printer

Not finding what you are looking for?
Epson Stylus Photo R2400 InkJet Printer Logo

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...