Question about RCA Televison & Video
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: No sound on LCD tv
We have the RCA L37WD22 tv. We bought it 4 months ago and much to our dismay, the sound went on the weekend and the screen shrunk. We had to take it in to be fixed. We were told it had shorted out and that the fuse needed to be replaced. We were also told that an upgrade was put into it. We have a one year warranty, but we are going to look into buying an additional warranty too.
Hope this helps.
Posted on Jun 04, 2008
No sound and a digital picture. i will assume you have no signal on analog rf cable. Thomson(RCA) have been having problem with these sets. The trouble stems from the digital cuircit board. We see alot of these. You used to get the digital board.. they are not availble.. so rca found the component on these that fail.. A VERY SMALL surface mounted fuse. With a lighted magnifer and some fine tip twezzers. we replace these fuses on these boards. Do you have any soldering experence..
Posted on Jun 10, 2008
SOURCE: rca 46 inch lcd tv, no sound
Go into the menu and change the HDMI Audio settings - the manual will give you a breakdown on this. HDMI is a little glitchy - if you were using red/gree/blue cables before switching to HDMI, you might want to consider going back to them - just an opinion.
Posted on Jan 03, 2009
SOURCE: Polariod FLM 3232 no sound
The audio circuit is located on the main board. You might be able to find one on ebay or shopjimmy.com. Just search your model number and look for main board. Just look at the pic and make sure it looks like yours before buying one.
The most common problem for no audio on this set has been a 10ohm resistor located on the top right corner of this board that fails. The location number is r385, which will be stamped on the board beside the resistor. If it's open(bad), you could change it and save a lot of money.
Posted on Jul 30, 2010
Tips for a great answer:
May 30, 2017 | RCA Televison & Video
May 23, 2016 | RCA Televison & Video
Oct 10, 2015 | Audio Players & Recorders
May 23, 2015 | RCA RTS7110B-2 40" Home Theater Sound Bar...
Mar 10, 2014 | DISH Network 135899 Remote Control
Jul 24, 2011 | Allen & Heath Allen Heath GL2400 32 Live...
Feb 13, 2011 | RCA F32676SB 32" TV
May 12, 2008 | RCA L46WD22 Television
Sep 18, 2017 | RCA Televison & Video
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: