Question about Altec Lansing Inmotion-IM600 (0021986954446) Docking Station
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: how to repair atp3 altec lansing
Best bet would be to just strip the wire with a wire stripper or utility knife and twist the bare ends together to fix the connection. A little electrical tape around those wires and you should be almost good as new. Of course you might notice some difference in quality but I'm pretty sure the only way round that would be replacing the cable.
Try it out and let me know how it works out for you. If you know how to solder it might be a good idea to solder the connection as well.
Posted on Jan 05, 2008
SOURCE: Altec Lansing ada745 fuse
Yes, it's a 1A 250V glass fuse, 0.75" (1.9cm) long. The only other number on the fuse is "239", if that means anything. You take it out by putting a flat screwdriver in the slot on the fuse holder cap, turn counter-clockwise, and pull out once it releases.
Posted on Nov 20, 2008
Your adapter is Part No. AVX300-A6859, Model No. 9701-00748-IUND.
Or You could get a universal that is rated for output of 18volt DC, 650ma, Center Positive.
I have used a 15volt DC, 900 ma with no problem, but I never run the volume high.
Posted on Dec 04, 2008
SOURCE: Altec Lansing ada745
I work for a charity that had one of these donated today and as I was looking for a new sub for my cinema system I purchased it. I have no other speakers with it and no way of switching or varying the volume. I opened up the back of the sub and slid the board partly out exposing the PCB.
You'll see 3 solder connections behind the scre in an "L" configuration. One of them is common, one volume and one power on. As I don't need volume, I'm happy with it being on full as my cinema system will vary the input, I joined all 3 together giving power on and full volume. It is working great now.
For you guys with volume controls, I would suggest shorting out the two rightmost pins in the "L" and I recon this will power it up and try varying your volume control. I recon it'll work just great.
Posted on Jan 22, 2009
Tips for a great answer:
Dec 29, 2013 | Altec Lansing iMT520 inMotion Classic Po
Jan 05, 2013 | Altec Lansing Muzx Mesh MZX106 In-Ear...
Jun 30, 2011 | Audio Players & Recorders
Dec 13, 2010 | Altec Lansing 220 Computer Speakers
Nov 03, 2010 | Altec Lansing BX1020 Computer Speakers
Feb 18, 2010 | Altec Lansing 221 Computer Speakers
Mar 25, 2009 | Altec Lansing Inmotion-IM600...
Nov 28, 2007 | Altec Lansing ACS 295 Computer Speakers
Oct 26, 2007 | Altec Lansing 621 Computer Speakers
70 people viewed this question
Usually answered in minutes!