Question about byD sign d:5032 50 in. HD-Ready Plasma Television
By 50" By D:sign plasma TV has several black lines on the top of the screen, it also seems to loose color control while watching and gives off a burnt smell. Is this fixable or should I junk it?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you purchased from a major retailer, could you try going to another store?
Also try contacting the manufacturer. Hopefully you are still under some kind of warranty, even if the place of purchase is no longer there.
Just to be sure, have you tried a different source - like a video camera, still camera with video output, laptop, or a different DVD player?
Good luck, I hope you can get it fixed!
Posted on Apr 07, 2008
SOURCE: 50 inch byd:sign 5032 plasma
negative, this problem needs some technical job to be done by a spedcialist. you have a problem with your power supply and it overheats thus shuts down
Posted on Apr 10, 2008
I had the same problem and had the TV serviced and found that the y board was blown $350 total. The repair guy explained that the board has a hot transister underneath that slowly leaked onto the board, but says that they can not get Samsung to admit to the problem. Works fine now but only have a 90 day warrenty on the parts.
Posted on Jul 01, 2009
The sypical source of a bad smell is electrolytic capacitors that are failing. Please UNPLUG this unit and have it repaired. There is a slight but definite chance of fire. This is not a major repair effort at this time, but a delay will significantly increase the repair cost. Please have this serviced ASAP.
Posted on Jul 18, 2009
SOURCE: I'm trying to program my
If your brand of TV does not respond to the remote control after trying all of the codes listed, or if your brand is not listed at all, try searching for your code.
1. Turn on your TV.
2. Press and hold SETuntil the Red Light blinks twice, then release SET.
3. Enter in 9 - 9 - 1. The Red Light will blink twice.
4. While pointing the remote control at the TV and press and release the CH + key until the TV turns off. (Note: You may need to press [CH+] numerous times).
NOTE: In the search mode, the remote control will send IR codes from its library to the TV.
5. Press SETonce to lock in the code. The Red Light will blink twice.
Posted on Sep 19, 2009
Tips for a great answer:
Jan 05, 2016 | Samsung Televison & Video
Jul 25, 2012 | LG 50PG20 50 in. Plasma HDTV
Sep 26, 2011 | Insignia NSPDP50 50 in. HD-Ready Plasma TV
Jul 18, 2011 | Samsung 50 in. Plasma TV
Jun 20, 2017 | Panasonic 50" 720p Flat-Panel Plasma HDTV
Jan 18, 2009 | LG 50PC5DC 50 in. Plasma HDTV
May 31, 2008 | Panasonic TH-50PX60U 50 in. Plasma HDTV
Sep 10, 2007 | Samsung HP-R4252 42 in. Plasma HDTV
Jan 12, 2011 | byD sign d:5032 50 in. HD-Ready Plasma...
237 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: