Question about Frigidaire GLEH1642F Front Load Stacked Washer / Dryer
MY CLOTHES COME OUT STAINED FROM THE WASHER. SORT OF YELLOWISH LARGE STAINS.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: problem with front load washer
Are stains a brown rusty color? If so, this may be an indication that the rear drum bearing is going bad. The bearing itself cannot be replaced. You will need to replace the entire back shell of the wash tub. Hope you have a warranty. This can be an expensive repair. Let me know if this is the case.
Posted on Jul 08, 2007
SOURCE: Dark brown stains
the rear tub bearing is shot and will have to be replaced you have to replace the whole rear tub. the brown marks are coming from the spider shaft assembly its rusted out you will have to replace the whole stainless steel tub.
Posted on Jul 09, 2008
This often is called "lint" but is really a "whiting" left by un-dissolved soap and can be seen at it's worst on dark colored clothes. This is made worse in a colder climate where the cold water entering the washer is much colder than normal. Things that can effect the quality of the finished washed products.
Too much soap: ( we have a test for this further down the page ) If you follow the manufactures instructions on the box, then chances are you ARE using too much soap. They like to sell you their product, I find cutting usage in 1/2 of what the box says will still wash good and also cut your chances of getting "whiting" on your clothes.
Posted on Nov 18, 2008
SOURCE: black marks
To eliminate possible bearing failure, spin the drum by hand and see if u can detect any rumbling noise or strange nioses coming from the drum, if u can then it is probably grease that is coming from the bearings. The other possible cause is an effect called ****, this is a result of washing at too low a temp, this causes a build up of dirt and grease,leading to the sort of prob that u are experiencing The thing u should do is to put the washer on at a high temp with powder in but no washing and do a full wash . This is called a maintenance wash, and should be done at least three or times a year depending on how often u wash more frequently if u do a lot of washing. Clean the door glass and rubber seal as thoroughly as u can ,and remove as much sludge and dirt as poss. This should help with your prob. Plz rate my solution. Thanks.
Posted on Dec 31, 2008
the dark stains are caused by mold build up on the boot of the washer, the e70 may be a pump error. you need to wet a cloth with bleach and then wipe of the mold builldup on the boot, this should solve that problem.
Posted on Jun 15, 2009
Tips for a great answer:
Feb 03, 2016 | Washing Machines
Dec 30, 2013 | Frigidaire ATF6000ES Front Load Washer
Jun 25, 2012 | LG WM2277H Front Load Washer
Apr 18, 2010 | LG 4.0 Cu. Ft. 7-Cycle Extra-Large...
Jun 13, 2009 | Samsung WF328AA Front Load Washer
Jul 26, 2008 | Kenmore 24032\24036 Top Load Washer
Jul 08, 2007 | Frigidaire GLTF2940ES Front Load Washer
Sep 16, 2006 | Baumatic BTWM4 Front Load Washer
May 03, 2013 | Frigidaire GLEH1642F Front Load Stacked...
77 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: