Question about Office Equipment & Supplies

Open Question

BUTTON STUCK ON SWINGLINE 3 HOLE PUNCH MODEL 535

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: Broken electric 3-hole punch

There are two phillips screws in the bottom. Once they are removed, the top and bottom of the case are held together with clips molded into the case. Take a wide flat screwdriver and place it in the seam and gently pry it apart. Might want to start on the back in case you ****** up the plastic.

Posted on Oct 25, 2009

  • 32 Answers

SOURCE: Swingline Model 525 electric 3 hole punch

It has a safety switch. This switch turns machine on when it detects paper and off if it doesn't. Something wrong with sensor. Broken, paper stuck under it, out of position. Will have to open it up and check the sensor. ***Always remember to unplug any equipment before working on it***

Posted on May 09, 2010

rabb_wesley
  • 1 Answer

SOURCE: We have a Swingline model

can't get center puncher to punch

Posted on Sep 28, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Swingline 74030 manual hole punch handle is locked down


by locked down I am going to assume you mean it will not go back to the normal postion when it is not making a hole. this can be caused by too many of the scrap pieces of paper that are left from making the hole. clogging the punch area. remove all the excess pieces of paper that may be stuck in the whole punch, then try again, you may have to pry the handle and or push and pull it until it releases. do not use again until the handle moves smoothly, clean the areas around the punch.

Mar 07, 2014 | Swingline 74030 Manual Hole Punch SWI74030

1 Answer

C11-32


The issue is with the punch unit. It may have a bad connection. It may also be something stuck in the paper detect sensor or the sensor is broken. All possibilities are with the punch kit.

Feb 18, 2014 | Konica Minolta bizhub Office Equipment &...

1 Answer

Cannot get the arm all the way up


this can be caused by excess paper stuck in the punch area. clean out all the excess paper, making sure to pay attention to the punch area. gently try to move the handle, it may take several tries to get the handle to move freely, make sure you clean out all excess paper before you use again.

Sep 23, 2013 | Swingline Swi-74650 Three-hole Punch - 3...

1 Answer

We have a swingline model #690 - after loading with new staples, it does not staple. It is plugged in and makes a sound like it's stapling but does not release a staple.


1. Make sure you have the correct staples for the machine. The type appears to be:
Swingline 50050 Cartridge Staples, Chisel Point, 1/2"" Crown, 3/16"" Leg, 5000 Per Box High-quality Swingline cartridge

2. Check the cartridge to make sure there are no visible jams.

3. Contact the manufacturer at http://www.acco.com/swingline/, or
Repair Service/Technical Support:
Phone: 800.790.7787

Apr 18, 2011 | Swingline Portable Electric Stapler

1 Answer

Swingline Model 525 electric 3 hole punch


It has a safety switch. This switch turns machine on when it detects paper and off if it doesn't. Something wrong with sensor. Broken, paper stuck under it, out of position. Will have to open it up and check the sensor. ***Always remember to unplug any equipment before working on it***

Apr 18, 2010 | Office Equipment & Supplies

3 Answers

Hello. I have a model #1000 Swingline Power Gun. It says,the extra heavy duty staple gun on the handle. I would like to purchase a box of 1/4" and 3/8" staples. The gun is so old I don't know the new...


Went to the local hardware and read the labels. The store brand fit and works as good as the original staples. The 1000 has outlasted several of the new fashion staplers. And the local hardware store is an Ace Hardware.

Jan 20, 2010 | Staples Swingline® 36115 Staple Guns Tools...

1 Answer

Broken electric 3-hole punch


There are two phillips screws in the bottom. Once they are removed, the top and bottom of the case are held together with clips molded into the case. Take a wide flat screwdriver and place it in the seam and gently pry it apart. Might want to start on the back in case you ****** up the plastic.

Jan 22, 2009 | Office Equipment & Supplies

1 Answer

Panasonic Commercial Three Hole Punch BH 780


This inquiry needs to be directed at Panasonic's warrantee department in customer service :

Panasonic is available at the following contacts :


E-Mail :


Telephone:

1-800-211-PANA (7262)
Call Center operating hours:
Mon-Fri 9:00 AM - 9:00 PM EST
Sat-Sun 10:00 AM - 7:00 PM EST


Snail Mail:

Panasonic Corporation of North America
Consumer Affairs Division
Panazip 2F-3
One Panasonic Way
Secaucus, NJ 07094

May 06, 2008 | Avocent 50-Ft Zip KVM Cable HD15 Male to...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...