Question about Washing Machines
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: My Ariston AML 125 dosen't
If the water is cold, check the inlet hose and the hot inlet in the dual inlet valve connected to the hose. If there is no hot water the cycle will not progress, and that may be related to the drain problem.
If the machine does not drain even with hot water, check the thermostat and the pressure switch. The thermostat decides when to open and close the hot inlet, moving forward with cycle when temperature is met. The pressure switch determines among other things when to start and stop drain pump.
The thermostat is tested reading Ohms, multimeter set on impedance must read low or no impedance at room temperature on thermistor contacts. The pressure switch is replaced if there is a drain problem and the rest does not help. This part is more difficult to test.
About the drain problem, check first drain lines, drain well and drain ose at the back.
As first thing call Ariston at the number listed on the owners manual and check warranty status.
Posted on Sep 15, 2010
Tips for a great answer:
Mar 02, 2015 | Washing Machines
Jan 23, 2013 | Washing Machines
May 03, 2012 | Washing Machines
Nov 03, 2011 | Washing Machines
Jun 23, 2011 | Dryers
Jan 21, 2011 | Ariston Technologies AW125NA 13 lbs. Load...
19 people viewed this question
Usually answered in minutes!