Question about Necchi Sewing Machines

Open Question

Necchi sub 22 needle size - Necchi Sewing Machines

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

taran_2005
  • 10515 Answers

SOURCE: I have a NECCHI BU

Hi,

Your machine uses standard needles. 15x1 system 705 sizes 9-18 which you can buy where ever needles are sold.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Oct 31, 2010

SOURCE: I have a Necchi Sub 22 sewing machine but I cannot

try this link, contact allyn international/necchi sewing machines
and ask them about a manual
mailto:%20info@allynint.com

Posted on Oct 07, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What kind or brand of needle do I get for my Necchi Omega Special Edition sewing machine?


Your owner's manual should tell you what type needles your machine uses. According to this site, 130/705 needles will work with your machine, are also very common, and are available in several brands: Schmetz, Janome, Organ, etc.

http://www.sewingpartsonline.com/necchi-6018-sewing-machine-parts.aspx

In addition, you will need to determine the needle sizes (60/8 through 120/19) as well as the needle point (universal, ball-point, sharp/microtex, top stitch, embroidery, leather...) so the needle is compatible with the thread and fabric you are stitching.

SCHMETZ Household Needle Chart

Be sure to change the needles frequently. A needle should be replaced about every 8 hours of sewing time. Sewists tend to skimp in this regard (although needles are the least expensive fix!), but the needle is the most frequent cause of sewing machine issues. So, if your machine begins to misbehave, the first thing to try is a brand new needle.

...

Jan 10, 2017 | Necchi Sewing Machines

1 Answer

Correct bobbin size for a Necchi Omega 6030


You can use either 16 or 16J. If your threads are loopy on the bottom side of fabric, the problem is either your needle thread tension is too loose or you have a snag in your needle plate where you have broken a needle. Check needle plate and clear snag if any. Then tighten up your needle thread tension until both needle and bobbin threads are in middle of fabric.

Jan 30, 2015 | Necchi 6030 Mechanical Sewing Machine

1 Answer

I cleaned my machine and now the bottom thread making huge loops and it is jamming up. i have a necchi omega 6015


have you cleaned under the needle plate
change the needle
make sure the thread has not come off the thread take up lever
some thread & needle don't work togeather--try this
Cut 6-8 inch piece of thread of the spool you are going to use for your project
Take the needle you are going to use for the project
& insert the thread thru the eye of the needle
& lift one end of the thread to a 45 degree angle
& if the needle is the right size for the thread it will slide down the thread
But if the needle hangs on the thread you need one size larger needle for the thread

Nov 21, 2010 | Necchi 6015 Mechanical Sewing Machine

1 Answer

Can't get the tension or the stitches to regulate


try a tension setting of 3 or 4
my mechanical necchi is set on 4, but the tension should be adjusted according to the fabric & thread & needle
here's a tip for needle & thread compatibility

Cut 6-8 inch piece of thread of the spool you are going to use for your project
Take the needle you are going to use for the project
& insert the thread thru the eye of the needle
& lift one end of the thread to a 45 degree angle
& if the needle is the right size for the thread it will slide down the thread
But if the needle hangs on the thread you need one size larger needle for the thread

Oct 26, 2010 | Necchi 6030 Mechanical Sewing Machine

1 Answer

I need to find needles for my necchi model 3101FA in Wisconsin


Your machine uses standard needles. 15x1 system 705 sizes 9-18 which you can buy where ever needles are sold. If the needles appear to be too short, then you have a timing problem
sewman7

Mar 20, 2009 | Necchi 3101 Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Necchi Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

179 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Are you a Necchi Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...