Question about Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher

1 Answer

FGHD2433KF1 err eu

When we start the dishwasher we receive code "err eu" - i had a technician come out to the house and it appears that there is no vent on what is indicated to be the vent on the drawing that was inside the unit. we aren't sure what to do next..

Posted by on

Ad

1 Answer

  • Official Brand Answer
  • 2,267 Answers

Good Afternoon Stacy,

I see that you are having trouble with your Frigidaire dishwasher, model# FGHD2433KF1, showing an error EU. I also see that you have had a technician out who stated that there was no vent inside the unit. I would start by contacting the manufacturer, to see if you are in warranty, and if not, if there is any assistance they can provide to you. Hope this is helpful.

-Best Regards-
WP

Posted on Apr 22, 2014

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
jumptrout51
  • 3361 Answers

SOURCE: My frigidaire dishwasher model #fghd2433kf1

It is in a delay wash mode.
Disconnect power for 60 seconds.
Re-connect power.
Press the Cancel button.
Press the regular wash cycle and start the dw.

Posted on Jul 17, 2010

dynastygrani
  • 21 Answers

SOURCE: frigidaire dishwasher model fghd2433kf1 keeps restarting after a few minutes

rlindaur179,There are a couple possible issues. We will start with the easy ones first.
1. There is a round shape float on the inside floor of the dishwasher.On this mode I believe it is in the front left. please check to see this float moves easily up and down. If there is any build up it could getting stuck in the upright position this can cause a reset in the cycle. Clean the float shaft. Lift float and clean shaft (steel wool works well)2. Replace control board
Hope this helpsJoe Connolly

Posted on Nov 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Frigidaire dishwasher Model #fghd2433kf1 flashing light with Error 'S'. Dishwasher will not start. I was able to restart it last time this happen by disconnecting power and then pres


Thank you for your post, Cathie Sanchez!

I understand that your Frigidaire dishwasher is displaying error code "S" and will not restart. The error code "S" usually stands for sanitize, this could also be a miscommunication within the control panel. I would recommend performing a reset on your dishwasher and you can do that by disconnecting power from your dishwasher for roughly ten minutes. If you continue to experience issues with the error code I would suggest having a professional technician out for proper diagnosis and repair. Hope this is helpful. -Matt

Jan 07, 2015 | Frigidaire Dishwashers

1 Answer

Fghd2433kf1 shows an s next to time what does this mean?


Hello friend, thank you for your post!

From my understanding the "S" stands for sanitize within your Frigidaire dishwasher. I hope this is helpful. If you have any additional questions please feel free to reconnect. -Matt

Oct 09, 2014 | Frigidaire Dishwashers

1 Answer

I have a PLD4555RFC dish washer and I'm getting the err display it will runn thru a whole cycle and right before the end it gives the err message is this solvedby doing the same sequence


Hello Ken R, thanks for the post!
I understand that your Frigidaire dishwasher, PLD455RFC, is going through the whole cycle and then will provide you an ER code. The code ER on a Frigidaire dishwasher stands for a membrane switch failure. Generally that means that the main control board has detected a stuck key or a key pressed in for more than a minute. I see you have already attempted to reset your appliance and you are still receiving an ER code. Some possibilities that could be causing this problem are a wiring issue or main control board. These intricate parts do require precision and patience, therefore when replacing the exchange of electrical components or removing them from your appliance, I always suggest seeking professional assistance. One must be very careful as these replacements can lead to potential harm. I hope this is helpful. -Matt

Jul 29, 2014 | Frigidaire PLD4555RFC Dishwasher

1 Answer

Error code 125


Hello Lou,
I see that your Frigidaire dishwasher will not start. I would recommend giving the appliance a hard reset. You will do this by switching the circuit breaker off that the dishwasher is attached to. When you do this you will want to leave it off for 20-30 minutes. Once the 20-30 minutes has elapsed, bring power back to the dishwasher and try to restart it. If you are still receiving a 125 error code and the dishwasher is not starting, I would suggest contacting your local authorized technician to diagnose and see why you keep receiving this error code.

-Best Regards-

Jan 22, 2014 | Frigidaire PLD4555RFC Dishwasher

1 Answer

Electrolux dw started with error code 3,now error code 11


Hello Denise, thank you for allowing me to assist you!

If you are receiving an error code E11, your dishwasher has detected an issue with the main control board timing out before receiving status of the drain valve. A qualified technician would pinpoint the problem by checking the wiring between both parts. If the wiring isn't the issue, he would need to determine whether the problem rest with the main control and valve. It really could be a hit or miss calculation in parts so I would personally reach out to an experienced tech that will be able to identify the precise reason.

Best of luck!

Chris

Dec 20, 2013 | Electrolux Frigidaire Professional Series...

1 Answer

Frigidaire dishwasher model fghd2433kf1 keeps restarting after a few minutes


rlindaur179,There are a couple possible issues. We will start with the easy ones first.
1. There is a round shape float on the inside floor of the dishwasher.On this mode I believe it is in the front left. please check to see this float moves easily up and down. If there is any build up it could getting stuck in the upright position this can cause a reset in the cycle. Clean the float shaft. Lift float and clean shaft (steel wool works well)2. Replace control board
Hope this helpsJoe Connolly

Nov 09, 2011 | Frigidaire FGHD2433KF Builtin Dishwasher

1 Answer

My Frigidaire fghd2433kf1 is not draining. I replaced my old dishwasher for this one two months ago due to the same problem. It appears that it might not be the dishwasher. What else could it be? Pump...


If you recently replaced the garbage disposal the dishwasher knockout has not been removed. OR the dishwasher drain hose is not high enough and water is leaking back in from the sink.

Aug 27, 2011 | Dishwashers

1 Answer

My Danby 1805 portable dishwasher leaks from underneath only when the water is being pumped back from the washer to the sink. My repair technician was not able to find the leak by looking from underneath...


Your pump may be cracked or a drain hose may have a hole. Also check the dishwasher housing not the cabinet that you can see I have seen small holds due to defects in the plastic that the housing is made up of. Of time with heat and moisture these hols may appear. Look for small crackes in crevices. They are hard to detect once the cabinet is removed start the dishwasher and have flashlight to see exactly where water is coming from.

If you have anymore questions please comment me back.

Jul 28, 2011 | Dishwashers

2 Answers

My frigidaire dishwasher model #fghd2433kf1


It is in a delay wash mode.
Disconnect power for 60 seconds.
Re-connect power.
Press the Cancel button.
Press the regular wash cycle and start the dw.

Jul 17, 2010 | Frigidaire Dishwashers

Not finding what you are looking for?
Frigidaire 24 in. PLD3465REC Stainless Steel Built-in Dishwasher Logo

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dishwashers Experts

Mike

Level 3 Expert

4340 Answers

Garth Jackson

Level 2 Expert

93 Answers

Brad Brown

Level 3 Expert

15691 Answers

Are you a Frigidaire Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...