Question about Fujitsu AMILO D-7820 Notebook

1 Answer

Bios update fail

My pc is out after bios update. Help me

Posted by on

  • omicron Nov 13, 2007

    Thanks Beni, but the problem remains as when the PC does not start from floppy.
    Do you have any other idea,
    Thank you in advance.



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 1,006 Answers

Did u follow those instructions?:



Posted on Nov 03, 2007

  • arben pllana
    arben pllana Nov 13, 2007

    If something has corrupted your BIOS and the computer wont boot,then there is nothing you can do except obtain a new BIOS chip. You need to be able to boot the computer in order to update the BIOS.

    Now if it is the CMOS memory that is corrupted, then that is a different matter. That can be reset to a default condition that will allow the computer to boot. You can do this usually by temporary moving a jumper on the motherboard. The motherboard manual will tell you how to do that. Or alternatively, remove the power cord and then remove the CMOS battery for a few seconds then replace it. The CMOS battery can be recognised as a silver disk about the size of a small coin.

    UNPLUG cmos batery out for 3 minutes and the board when back to factory state


    It can help you to work but windows will not recognized anymore, but at least you can reinstall it again and start fresh.

    Tell me if you got help?



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Toshiba Satellite A200-FE008C bios update failed

You can't. The mother board is now dead. You will need a new bios chip.

Jan 22, 2014 | Toshiba Satellite Pro A200-EZ2204X...

1 Answer

Gateway 504gr bios update failed

You maybe using the wrong version, it's already updated, or simply can not be upgraded.
Unless there is a TRUE need to flash, and usually there is not, I would stay away from. So many people try and fail, only to wipe the CMOS, leaving the system useless. Here is some sound advice on the subject.

Oct 01, 2012 | Gateway 504GR PC Desktop

1 Answer

I flashed bios and failed. My laptop doesnt boot not even showing the bios screeen. Its extensa 4230. Need help please

You were warned!

Updating an incorrect BIOS may cause harm to your system. We recomend that you only do this after being instructed by one of our Customer Care representatives. By using these updates you agree to accept the possibility of product failure.

There is no ned to update ANY BIOS on ANY system unless the update fixes a specific problem you are having which will be outlined in the release notes.

Dec 14, 2010 | Acer TravelMate 4320 Notebook

2 Answers

My acer aspire one 532h-2db blank screen but the power is on. please help me! thanks.

Thank you for contacting Fixya. This is Anil.

I understand that the Netbook starts but there is not display on the screen.
It may happen due BIOS failure on the computer. Try updateing the BIOS. Updating the BIOS will require a USB flash drive to store the BIOS information on during the update. To perform the update to the BIOS:
Go and download the latest BIOS for the netbook.
Extract the files from the downloaded zipped BIOS file.
In the Dos folder, Copy Flash.Bat; Flashit.exe; Nav50.fd to the USB flash drive
Ensure that the AC adapter is plugged in.
Insert the USB flash drive into a USB port.
Press and Hold down the Fn and the Esc keys together and press the power button.
When the unit's power light comes on wait a few seconds and release the Fn and Esc keys.
After the keys have been released the power light will start to blink.
During the BIOS update process the display will be blank.
Let the unit run and after approximately 1 to 7 minutes, the unit should reboot and the BIOS will be updated.
If the unit fails to reboot, or the BIOS was not updated sucessfully, try the steps again. If the unit continues to fail to reboot, the unit may need service.

I believe the above resolution should resolve the issue, however, if the issue still persists, please contact us. We will be glad to help you.

Thank you. Have Great Day.


Jul 30, 2010 | Acer Aspire One PC Notebook

1 Answer

Changed out the motherboard reformatted a blank hardrive, No issues in the reformat.Installed drivers then updated the bios.Currently will only boot to bios briefly then shuts down.Tried resetting the bios...

Sounds like your BIOS update did not complete successfully. Head to the board manufacturers website and check if there is some way you can reload the BIOS and recover from this. Most boards now have dual bios which means that if one bios chip fails or an update fails, you can reload the stored BIOS through the other chip. If you are unable to recover from a failed BIOS update, you may need to purchase a replacement BIOS chip from the board manufacturer. You may even be able to reload the original BIOS onto the chip through your local PC repair store so give them a call and enquire..

May 21, 2010 | HP Compaq Presario SR1300NX (PP195AA) PC...

1 Answer

I have a toshiba satellite A205-S5809 and after a bios upgrade it will not power up. Can anyone help me?

A bios update should not cause the laptop to fail in powering up. Regardless, whether you used the correct bios update or not, the laptop should still power on. You may not be able to boot to windows, but you should still power up.

You are have hardware failure unrelated to bios change.

Oct 31, 2009 | Toshiba Satellite A205-S5809 Notebook

1 Answer

I can't update my Travelmate 8104WLMi. Every time

it is not flashable then you dont ever update your bios unless it has a problem.

Oct 19, 2009 | Acer TravelMate 8104WLMi Notebook

2 Answers

Bios update failed *flash*

Did you make copy of your original bios before flashing...if yes then reflash with your original.
If No then trying reflashing again making sure no power cuts, dont touch computer until flashing is complete.
Are you using the correct bios for your MoBo?

Jul 04, 2009 | Acer Computers & Internet

1 Answer


Hi, This problem sounds more like a failing poewr supply than a bios problem. Can you use a multimeter? If so then check the voltage output from your power supply. The red wire = 6v+or-1v. The yellow wire= 12v+or- 1v. black is negative. If you are not sure then try a different power supply. Goodluck mistyman

Sep 14, 2007 | Asrock P4I45GV R5 Motherboard

Not finding what you are looking for?
Fujitsu AMILO D-7820 Notebook Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18419 Answers

Alun Cox

Level 3 Expert

2678 Answers

Computer Links

Level 3 Expert

2386 Answers

Are you a Fujitsu Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides