Question about Sewing Machines
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Remove the needle plate, bobbin case and bobbin and clean any lint that has accumulated.
Oil, if the manual indicates you should do this and where it should be done. Some do not as it has to be done by a repair tech.
Re-thread the machine with the presser foot in the up position.
Make sure the bobbin thread is feeding from the bobbin spool in the correct direction and through the proper guides.
If the problem continues, the machine will have to be services by a sewing machine repair person. Take samples of the stitching so they can see what it happening - it could be the timing has to be reset.
Posted on Feb 20, 2010
Tips for a great answer:
Feb 13, 2018 | Brother Sewing Machines
Mar 21, 2017 | Brother Sewing Machines
Jun 12, 2016 | Brother Sewing Machines
May 18, 2015 | Sewing Machines
Mar 09, 2015 | Brother Sewing Machines
May 10, 2014 | Brother Sewing Machines
Mar 20, 2009 | Brother Sewing Machines
Mar 15, 2009 | Brother LS-2125 Mechanical Sewing Machine
Feb 21, 2009 | Brother Sewing Machines
34 people viewed this question
Usually answered in minutes!