Question about Sewing Machines

Open Question

Kenmore sewing machine model 1703 replament clutch

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 323 Answers

SOURCE: can't tighten clutch on Kenmore zig zag sewing machine.

The clutch has fallen off the shaft. Remove the very small screw in the clutch release screw to remove the clutch release. Place the clutch(round thing with ears on it) back on the shaft with the center ears pointing towards the outside. Put the clutch release screw back on. Tighten it to make sure it works
properly. Put the small screw back in the clutch release screw and test it again. If it will not tighten or release properly, remove the clutch ,rotate it180 degrees and try it again.This should solve your problem.
sewman7

Posted on Feb 16, 2009

Ad
clyde2j2
  • 137 Answers

SOURCE: replace belt kenmore sewing machine

Try this URL:

www.sewingmanuals.net

Posted on Mar 02, 2009

  • 980 Answers

SOURCE: clutch won't release.

This what you do, get a wide blade screwdriver, place the screwdriver blade on one of the slots or grooves on the stop motion wheel on the left hand side as you look at the machine from the end, the the top of the handle a good thump and you will find it will release, don't over tighten once you have freed it off.

Posted on May 29, 2009

SOURCE: kenmore sewing machine mod 1703 motor runs but

By 'The wheel the belt is on' you mean the motor pully? If that is so obviously some oil has some how made way on the pully and the belt. Try to remove the belt and clean both wheels and the belt free of oil. This shd slove the problem.

If it doest then please send a photo of the arrangement showing pully and belt. U didnt mention if the machine is old or new. Did u oil it recently before trouble developed?


Posted on Oct 17, 2009

  • 1116 Answers

SOURCE: Can I buy a zipper foot attachmet for the Kenmore

You can find generic presser feet at fabric stores. Hancock has a great variety - JoAnn, not so many.

Take a presser foot with you when shopping so you are sure to get the right shank - the newer machines have low shanks and the old ones long shanks.

Posted on Feb 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the difference in the kenmore 158.1603 and the 158.1703


ifin u axd dis question onm fixit/ why dint u just google da sewng machine .?? so go an google da sewng machine ## an u wil fnd out dat da r da same. an den u will git alls da ress of da info u need to fix/maintane/wurk da swein machine uz gots. git-r-dun bobbyiebabe.

Jun 15, 2012 | Sewing Machines

1 Answer

Kenmore sewing machine Model 1602: I was filling a bobbin and when I went back to sewing - the needle won't go up and down. Motor runs when I press on the footpad. It is as if the clutch is stuck as well...


Sound like you need to take it out of bobbin winder mode. Suggest looking for a way to engage the clutch. Turn the center knob on hand wheel and or move the bobbin winding post back to postion.

The center hand wheel should move about 1/3 turn towards you to look it back into place.

Feb 09, 2011 | Kenmore 15516 Mechanical Sewing Machine

1 Answer

I have a kenmore sewing machine model #385.1249180. I cannot disengage the clutch knob from the hand wheel when I spin my bobbins, therefore the needle moves up and down as the bobbins spins thread. Do You...


Usually when you pull the clutch knob out it disengages the sewing machine needle shaft. At least, that is how my 2 Kenmore's work. You can always take your machine into Sears sewing department and ask the sewing machine salespeople for help, they are really helpful in my area and more than happy to help you for free. Good luck

Dec 23, 2010 | Sewing Machines

1 Answer

On my Kenmore 15250 sewing machine to wind the bobbin I need to release the clutch by turning clutch knob towards me, so says the instructions booklet. But the clutch knob does not move apart from the...


On my Kenmore I had to pull the knob out to release the clutch, then push it bak in. I don't know if that is the same for you. You can try it, if it doesn;t move, it was worth a try. You could just take to Sears, sewing machine department and ask the salesperson what to do, they should help you for free, our Sears is pretty good about such matters.

Sep 13, 2010 | Kenmore 15208 Mechanical Sewing Machine

1 Answer

Can I buy a zipper foot attachmet for the Kenmore model 1703 sewing machine?


You can find generic presser feet at fabric stores. Hancock has a great variety - JoAnn, not so many.

Take a presser foot with you when shopping so you are sure to get the right shank - the newer machines have low shanks and the old ones long shanks.

Feb 20, 2010 | Sewing Machines

1 Answer

Kenmore sewing machine mod 1703 motor runs but


By 'The wheel the belt is on' you mean the motor pully? If that is so obviously some oil has some how made way on the pully and the belt. Try to remove the belt and clean both wheels and the belt free of oil. This shd slove the problem.

If it doest then please send a photo of the arrangement showing pully and belt. U didnt mention if the machine is old or new. Did u oil it recently before trouble developed?


Oct 17, 2009 | Kenmore Sewing Machines

1 Answer

Clutch won't release.


This what you do, get a wide blade screwdriver, place the screwdriver blade on one of the slots or grooves on the stop motion wheel on the left hand side as you look at the machine from the end, the the top of the handle a good thump and you will find it will release, don't over tighten once you have freed it off.

May 28, 2009 | Kenmore Sewing Machines

1 Answer

Can't tighten clutch on Kenmore zig zag sewing machine.


The clutch has fallen off the shaft. Remove the very small screw in the clutch release screw to remove the clutch release. Place the clutch(round thing with ears on it) back on the shaft with the center ears pointing towards the outside. Put the clutch release screw back on. Tighten it to make sure it works
properly. Put the small screw back in the clutch release screw and test it again. If it will not tighten or release properly, remove the clutch ,rotate it180 degrees and try it again.This should solve your problem.
sewman7

Feb 14, 2009 | Kenmore 15516 Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1125 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...