Question about Bowflex Treadclimber

1 Answer

Magnets in the drive pully

I have just changed out my belts and one of the treadles on my treadclimber. I am still having the same error code with H-23. I am pretty sure I have burned up the motor and am waiting on the replacement to be delivered at the end of the month. However, as I was reading the instructions for putting on the new belts, I noticed the caution which discusses a magnet on teh inside of the drive pully. It said to be sure and notice the positioning. I could find no magnet on the inside of the drive pully wheel. I saw an round molded indention where something like that could be housed, but no visable magnet. Do I need to order one, or is it simply imbedded and I didnt look close enough?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 25 Answers

Dear
almost magnet is here

you can countiue contact us with smart phone on wattsapp or telegram by :
+989195116738

Magnets in the drive pully - roller-fc5d3qkuehxyghwmybtp3omc-4-0.jpeg

Posted on Apr 10, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: bowflex tc 1000 treadclimber

TC1000 from Bowflex, works okay for 15 mins then the speed surges ahead and stops dead with error E1

Posted on Jan 12, 2010

  • 4 Answers

SOURCE: I have put together my

Have you tried customer support at Treadclimber.com?

Posted on Sep 03, 2010

  • 1 Answer

SOURCE: my bowflex treadclimber tc 20 is putting out error codes H03,H13,H24 whats wrong

I have the exact problem. My machine is 3 days old. I am also getting this H03, H13, H24 error. I called the 1-800 number for the Treadclimber TC20 and they informed me that a handful of machines were sent out with a bad control board. I am waiting for a replacement board.

Posted on May 08, 2012

ercupa190
  • 12223 Answers

SOURCE: bowflex treadclimber gives error code h13 h24

this a problem with a bad design from a factory. You must call to service support a explain this error. Is a problem,with a PROM AND EPROM.

However you can try to RUN the software calibration for diagnose, and troubleshootingl.

God bless you

Posted on May 09, 2012

ercupa190
  • 12223 Answers

SOURCE: Bowflex Treadclimber TC20 error messages

Dear Sir:
This is a common error in this kind of machine. You must call to the company bowflex, and claim the problem. The hardware design is defective, they will replace.
However you will the same problem, if you do not act right now.
God bless you

Posted on May 10, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Treadclimber error code H-23


Answer from bowflex service line. H 23 means "no tac signal". which means, a signal cable is loose or disconnected. OR the motor needs replacing...estimated cost $350 Canadian.

Apr 01, 2014 | Exercise & Fitness

1 Answer

The treadles on my treadclimber are not rising and falling evenly. The treadle on the right seems ok, but the left treadle stays significantly lower. I have tried adjusting the dial to a lower number on...


Please RUN the software calibration for easy diagnostic and fix it.
go under the HOOD motor follow the steps, or read your owner manual /download from www. fitness.manualsonline.com

GOD BLESS YOU

Dec 02, 2013 | Bowflex Treadclimber

1 Answer

The right treadle is rubbing against the right upright why


please see the video and proceed according for fix it.
Please remember to LUBE the deck belt+roller bearing too.
God bless you

Feb 27, 2013 | Bowflex Treadclimber

1 Answer

Bowflex Treadclimber TC20 error messages


Dear Sir:
This is a common error in this kind of machine. You must call to the company bowflex, and claim the problem. The hardware design is defective, they will replace.
However you will the same problem, if you do not act right now.
God bless you

May 09, 2012 | Bowflex TreadClimber TC20

1 Answer

Treadclimber centering


Dear Sir:
ecalibrate the machine if speed is not registering, belts stop turning or the display readout shows an "err, LS, OS" on the face. Calibrate the TreadClimber by plugging it in. Stand on the foot platforms, or floor mat. Do not stand on the walking belt. Insert the safety key. Press the "start" key when "CAL/PRSS/STRT" shows on the readout. If readout fails to show the "CAL/PRSS/STRT" symbol, turn off machine and turn it back on. Press "ENTER" and then "DOWN SPEED" at the same time until "CAL/PRSS/STRT" shows up on the display. Belts will start and stop during the calibration; do not be alarmed. Do not make any adjustments or interrupt the display of numbers as the unit goes through the calibrations. When the machine is finished calibrating, the readout will display "CAL...PASS" and you can press the "POWER" key to get out of the calibration section.

sincerely. God bless you.

ernesto cuadra
managua, nicaragua. c.a

Feb 15, 2012 | Exercise & Fitness

1 Answer

We canNOT get the belt on the new treadclimber - there's no give and it's just not going


Can you describe your machine type (TC5000, for example) and what you've done to try and reposition the belt? Also which belt are you referring to? The treadle belt or the motor belt? I just went through a complete deck/walking belt replacement, and it's not for the faint of heart. Needed to dismantle almost 85% of the machine.

Aug 28, 2010 | Bowflex Treadclimber

1 Answer

My Bowflex Treadclimber keeps coming up with an Error L5. This error message shows up 5 seconds after turning the machine on. My husband looked it up yesterday and said that the machine needs to be...


L5 due to the screen is actually LS (lost signal) the first place to check is the gap of the speed sensor. under left treadle 2 black wires. Removing the rear covers will allow you to see the lwr cntrl board and move the belt by hand. The gren led light should flash once per revolution of the drive pulley. If not then it is the speed sensor. Adjust sensor to pully about thickness of a credit card. then calibrate unit.
LS is also tripped by any broken wires or bad connections. Start at sensor and board first.

Jul 21, 2009 | Bowflex TC3000 Treadclimber

1 Answer

Bowflex Treadclimber Calibration Failed


Check the wire connection at the bottom of the right upright. Male Female white connectors. if they are good then check speed sensor under the left rear treadle. Must be about credit card distance from drive pulley. Remove rear covers to access. Note you will have to remove both side covers and back cover. 10 Screws.

Jun 23, 2009 | Bowflex Treadclimber

1 Answer

Bowflex Treadclimber rubs against housing.


Adjustment is needed. Remove rear covers and using a 9/16 wrench lossen the four bolts that secure treadle assembly to base. Place a 3/4 inch piece of plywood or a 3/8 inch socket extension in between the treadles in the front area. with that in place center them about an 1/8 in closer to the right upright as when you tighten the four bolt up the drive belt will place additional pressure and they should center perfect. tighten bolts...tight. remove wedge from between treadles and recalibrate unit. replace covers and enjoy. Use turtle wax on area rubbed to prevent rust.

Mar 05, 2009 | Bowflex Treadclimber TC5300

2 Answers

My bowflex tc5000 will not calibrate


Check the speed sensor and make sure it is no farther than a credit card away from the drive pully. Unplug unit Located...remove left and right rear covers and back cover. 3 screws in each and 4 screws in back. Follow 2 black wires up to drive belt pulley under back of left treadle. slide sensor in with cc between it and the pully. Recalibrate

Dec 07, 2008 | Bowflex Treadclimber TC5300

Not finding what you are looking for?
Bowflex Treadclimber Logo

Related Topics:

509 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bowflex Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Howard
Howard

Level 2 Expert

115 Answers

Glenn Mayer
Glenn Mayer

Level 2 Expert

91 Answers

Are you a Bowflex Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...