Pair jabra with xperia

Delete Jabra from Phone and reboot. Tell phone to search for Bluetooth devices. PRESS THE BLUTOOTH BUTTON ON JABRA! Now you are Paired. Make sure phone is not on Mute.

Jabra Tour - Support

https://www.jabra.ca > Support > Jabra Tour

Get support for your Jabra Tour. Find all product guides, resources and FAQs.

..

The Pairing key is 0000
Have you tried to pair with other devices ?
It can support up to 8, connected to two at the same time as well.
Jabra Bluetooth Headsets Wireless Speakers Office Speakerphones

http://www.youtube.com/watch?v=C5koqNKSjB8
I could try and explain it but this video link below explains it reaaly well
http://www.youtube.com/watch?v=qUtvbRSx00A
laptop has to have bluetooth ability if it doesn't get an usb bluetooth adapter

forget the headset
turn bluetooth off
turn the headset device off
reboot phone.
try again

most pairing when asked by the device requires a 00000 passcode
but you need to set the jabra and the iphone up for pairing
here is a link for jabra the iphone should see it when the jabra is set to set up mode..
http://www.jabra.com/support/Jabra-JOURNEY_100-47300000-15

My Xperia X10 cant find my handsfree device nokia BH 105. Please help.

This is one of the mistake commonly done by many people. First you need to pair. Let me walk you through. First, the headset has to be switched to pairing mode which is done by holding the on button for a while even after the headset is switched on. Then the bluetooth headset light will remain on. You switch on the phone bluetooth, search new device. Then select it and press the option for pairing. Read the instructions which come on the phone display and select accordingly. It will ask for passcode which is usually four zeros. Then it will get paired ask you whether to connect. You select connect and you are done.

The actual problem was Plantronics, I was not turning on pairing mode. I was confused with quick pair which starts not immediately after turning on, but you need to hold the button longer until led will start blinking blue and red.

To make this complete: You need to turn off the headset (hold call button several seconds until it makes descending tone). Then hold button to turn on and keep holding 8 seconds more until blue light is on solid. Then initiate pairing at phone, and enter 0000 as the code.