Question about Nintendo Wii Console

2 Answers

Need UL certification listing or NRTL listing for the Wii

We are a hospital and are required to obtain the UL certification on any product brought into the hospital that will have patient contact. Can you give me the UL cert. number?

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 104 Answers

Fiend your solution direct from nintendo. Here is your solution....
Need UL certification listing or NRTL listing for  - 9047829.jpg


Posted on Jul 22, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 80 Answers

I checked for the UL Certification on the website. For video equipment it is E152201. if that does not help, you can go online and use any information that you have for the wii to search for it. I could not find anything specifically for the wii with limited information. I apologize for the lack of info on my part.

Posted on Jun 21, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


As much as I would like to say that it is because they want you to buy a new panel, it is required to obtain their UL listing.

May 27, 2014 | Edwards Furniture Edwards Est Remote...

1 Answer

I am moving interstate. From Perth to Brisbane in August. We brought a 2012 Nissan Nirvara Double cab ute last month and are having it transported to Brisbane. Once it is in Brisbane, how do I go about...

If you are in the defence services the rego needs not be changed until the current rego runs out. If not as soon as you have a current place of residence you will need to change it over . You will need a road worthy certificate ( available from certified inspection stations) . You will also need to change the address on you licence once you have settled . You can get 6 month or 12 month rego and including the road worthy certificate it will be around $1000.00 (maybe a bit less). If you surrender the plates before you leave you may be entitled to a partial refund from WA and you can get a permit here to drive your vehicle to an inspection station. Information can be obtained from Qld department of transport. as to your legal requirements and possible rego costs.

May 26, 2014 | 2010 Nissan Navara 2.5

1 Answer

Brought a hp compaq desktop computer with a wiped hard drive. What is needed to restore it?

Check the certificate of authenticity affixed to the case. Obtain the appropriate version of windows (Windows 7 versions can be downloaded from digital river). Boot from the disk. Follow prompts, insert key when prompted.
The key will allow installation, but will not activate via net. You will need to do this by phone.
You would then need to search the vendor site for the drivers and install. Usual order is, chipset, sound, ethernet/lan, video, wireless if fitted. Some boards require AHCI drivers as well.

Oct 21, 2013 | HP Computers & Internet

1 Answer

Will an Eaton br 120 circuit breaker properly replace a challenger c120?

Hi - I'm an electrician and can help you with this question.

It is very important to note that only those circuit breaker models listed on the electrical panel cover are permitted by electrical code to be installed in the electrical panel. Introducing any other brand or model circuit breaker voids the UL or FM listing, regardless if it fits.

This is because the manufacturer sends his product to a UL and/or FM laboratory for thorough testing and certification. The product (electrical panel in this case) is tested with all the breakers the manufacturer supplies with the panel. If the panel passes the tests, the manufacturer receives the much coveted UL and/or FM listing or mark for the panel and breakers that pass and can be marketed and sold. Only those breakers that were tested and passed in that panel and are permitted to be used in the panel and can be considered a UL and/or FM listing assembly. The code allows only those electrical products bearing this mark to be installed. So, even though each manufacturer has their individual products tested in different combinations, they can not be "mixed and matched" between different manufacturers and products not tested in that particular combination. The only the tested combinations the passed are printed on the inside of the panel cover. Mix and match results in an electrical code violation (an inspector would require the correct breaker before giving an approval) and if a fire breaks out - and it is determined that the source was this circuit breaker - most insurance companies will not pay a claim. That's a lot of risk for a $10 circuit breaker.

You should only install a circuit breaker that is listed for use in the panel you have. Check this link for a listing of C120 breakers available for purchase

Good luck!

Apr 18, 2012 | Challenger 20 Amp 1 Pole C120 Circuit...

1 Answer

How to get a death certificate of person

This can be obtained at the declarative site of pronunciation, preferably, the hospital were the deceased was transferred to after the death occurred. After the autopsy has been administered, the certified death certificate will be formed and filed at the participating hospital/legal outfit.

Once these formalities/procedures have occurred, you can obtain this document, via your local law firm or walk-in appointment with the local medical establishment/records office.

Apr 30, 2011 | Computers & Internet

1 Answer

Yamaha ysp 900 will not turn on,occasionly will come on if power socket is switched on and off rapidly,it will then just stop working randomly..

There are several reasons that can cause the power transformer to fail. The most common reason in Yamaha's experiences is overheating. When a transformer gets too hot, a heat sensitive device called a "thermal fuse" opens up. This renders the transformer useless and it must be replaced. All Yamaha products sold by our authorized dealers carry an Underwriters Laboratory or CSA Certification. This UL listing assures you that the product is completely safe to use when operated in accordance with your owner's manual. And should there ever be a failure within your unit, it will not shock you or catch fire or present any hazards to life or property. The thermal link in your transformer is a requirement to obtain the UL or CSA listing. This thermal link opens up instead of having your transformer catch fire or cause potential electrical hazards. Your amplifier should not have anything placed on the top of it, covering the vents. These vents need to be left open as that is how the unit cools itself. If your amplifier is in an enclosed cabinet, air movement could be severely restricted. Consider a small cooling fan for increased air circulation. Never remove the feet from the bottom of your unit, as there are ventilation holes on the bottom of your unit as well. Another reason for power transformer failure is a continuous heavy current draw through the unit over a prolonged period of time causing excessive heat buildup within your unit. This could be related to the impedance of the speakers you are using, the level of the volume control, and how many speakers you are using at one time. You can only use 1 pair of 4-ohm speakers, or 1 pair of 6-ohm speakers, or 2 pair of 8-ohm speakers. Any other combination or types of speakers that you are using other than what was just mentioned could lead to premature failure of your amplifier or power transformer. In addition, do not turn your volume control further than the halfway point. If you are doing this, you run the risk of damaging your amplifier or speaker system. (See Why Do I Keep Blowing tweeters/Midranges, And How Do I Prevent This From Reoccurring?). If the level of sound is not high enough for you when the volume control is at the halfway mark, then we recommend that you obtain a larger power amplifier. If you are going to evaluate the purchase of a larger power amplifier, you should choose one that has about double the power of the amp you are currently using. And be sure that your speaker system is capable of handling the power of the amplifier you are considering.

Jan 26, 2011 | Yamaha YSP-900

1 Answer

I need UL and NSF certification proof for Hoshizaki KM-900 MAF Ice maker. Can please provide?
This is the manual for your machine. Check out the pages that have examples of the nameplate information. It shows that the machine is approved for UL and NSF. Otherwise, I would suggest contacting Hoshizaki directly.

Dec 30, 2010 | Hoshizaki Commercial Freezer KM-500MAH

1 Answer

Unlock my phone

Dear sir, How are you, I'm sending you some codes and I hope these codes will surely help you out.:)

Nokia Code & their function:

  • *3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
  • #3370# Deactivate Enhanced Full Rate Codec (EFR)
  • *#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time
  • *#4720# With this Nokia code you can deactivate the Half Rate Codec
  • *#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type
  • *#9999# Phones software version if *#0000# does not work
  • *#06# For checking the International Mobile Equipment Identity (IMEI Number)
  • #pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
  • #pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
  • #pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
  • #pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
  • *#147# This lets you know who called you last (Only vodofone)
  • *#1471# Last call (Only vodofone)
  • *#21# This phone code allows you to check the number that "All Calls" are diverted to
  • *#2640# Displays phone security code in use
  • *#30# Lets you see the private number
  • *#43# Allows you to check the "Call Waiting" status of your cell phone.
  • *#61# Allows you to check the number that "On No Reply" calls are diverted to
  • *#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to
  • *#67# Allows you to check the number that "On Busy Calls" are diverted to
  • *#67705646# Phone code that removes operator logo on 3310 & 3330
  • *#73# Reset phone timers and game scores
  • *#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible
  • *#7760# Manufactures code
  • *#7780# Restore factory settings
  • *#8110# Software version for the nokia 8110
  • *#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again
  • *#94870345123456789# Deactivate the PWM-Mem
  • **21*number# Turn on "All Calls" diverting to the phone number entered
  • **61*number# Turn on "No Reply" diverting to the phone number entered
  • **67*number# Turn on "On Busy" diverting to the phone number entered

    Good Luck. :)

Dec 16, 2009 | Motorola Mobility E770 Cellular Phone

1 Answer

Hi i jus need box and speaker specs for the dual 2 ohm 10pw3

General Information Manufacturer: Eaton Corporation
Manufacturer Part Number: 103004248-5592
Manufacturer Website Address:
Brand Name: Eaton
Product Series: PW3105
Product Model: PW3105 700
Product Name: Powerware PW3105 700VA Tower UPS
Product Type: Standby UPS
Technical Information Plug/Connector Type: NEMA 5-15P
Receptacles: 4 x NEMA 5-15R - Battery Backup System
Switching Time:
  • 6 ms
  • 6 ms
Dataline Protection: RJ-45 Internet
Power Description Load Capacity: 700VA/420W
Input Voltage: 110V AC
Input Voltage Range: 0V AC to 160V AC
Output Voltage: 115V AC
  • 50Hz
  • 60Hz
Management Overload Protection: Circuit Breaker
Interfaces/Ports Interfaces/Ports: 1 x USB
Battery Information Batteries: Maintenance Free Sealed Lead-acid
Backup/Run Time: 3 Minute 420W Full-load
Physical Characteristics Form Factor: Tower
  • 4.4" Height x 11" Width x 7" Depth
  • 4.4" Height x 11" Width x 7" Depth
Weight: 9.7 lb
Miscellaneous Certifications & Standards:
  • Safety: UL 1778 3rd Edtion/CSAC22.2 No107.3, Designed to meet UL497A
  • EMI: FCC Class B
  • Software Included: Powerware LanSafe Software
    Green Compliance: Yes
    Green Compliance Certificate/Authority: RoHS

    Jan 22, 2009 | Powerware PW3105 700 (103004248-5501)...

    Not finding what you are looking for?
    Nintendo Wii Console Logo

    Related Topics:

    119 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Nintendo Video Game Consoles & Games Experts

    Raj Patel

    Level 3 Expert

    917 Answers

    Julian Wainwright

    Level 2 Expert

    64 Answers

    Zhenya Ogorodnikov

    Level 2 Expert

    218 Answers

    Are you a Nintendo Video Game Console and Game Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides