Windows 7 64 bit & easy cap - Computers & Internet

From Amazon website "This EasyCap Model (DC60) is compatible with Microsoft Windows XP and Vista 32-bit ONLY".

So it is not compatible with Windows 7.

This Microsoft discussion has had mixed results, but points to a driver you could try. USB 2 0 Video Capture Controller for Windows 7 64 bit

Your question is not easy. In fact, it's not a question. As they ask on Jeopardy, can you please state this in the form of a question? Perhaps a sentence or two that state the problem, and then a sentence that asks for what you want us to help you with?
Help us help you.

Disconnect the divice uninstall the driver restart the laptop and then reinstall the driver again restart the laptop then connect the device it works.

Hello,

This should be pretty easy to fix. I have seen this many times before. Here's what to do:

Go into device manager and expand 'universal serial bus controllers'.

Start at the very bottom, and start deleting the usb root hubs one by one. You will lose your touchpad control at some point, as the touchpad is actually a usb device. One of thwo things will happen.

1. The usb hubs will automatically be re-detected and re-installed.
2. You will just lose touchpad control after deleting one of the root hubs. If this happens, then shut down using the power button, and restart. Th usb hubs will be reinstalled once you log back into windows. Please let me know if this doesn't fix it.

Joe

download microsoft office for window 7,64-bit

what software what problem

I also just received my Easy Cap today (for a 64-bit Vista PC) and a little hunting online revealed the following web page which has a link to some drivers for Vista 64-bit:

http://dekonass.no-ip.biz/?p=462

The link is just under the picture. Worked for me.

Good luck