Question about Office Equipment & Supplies

1 Answer

I have a hp psc 1209 all in one printer and it will pick up paper and sound like its printing but when the paper is ejected its blank

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 28 Answers

Hey Janet,
Sorry but sometimes we miss something simple - I am not familiar with this particular printer, but had to find out if it is an ink jet or a toner cartridge unit - With ink cartridges, has the printhead still got ink?, has the printhead part that sprays ink, gotten plugged up with dried ink?(Remove it and soak it in some hot water for 5 min or so and wipe with a lint free cloth in one direction only, to clean it, then reinstall it and try a test pring again), or lastly, did you change the cartridge and forget to remove the protective tab, it might be like a piece of tape or an actual removable plastic cover?
ehudson37

Posted on Apr 21, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
tom19511
  • 1601 Answers

SOURCE: paper jam (missfeed) message when using the printer hp psc 1510 all-in-one

HP's answer to your question.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpu00697&lc=en&cc=us&dlc=en&product=428800&lang=en

Posted on Nov 09, 2007

voodoomox
  • 1689 Answers

SOURCE: 2200d hp laserjet

have you completely removed the protective plastic strip? if yes, try to take the cartridge out and gently shake it tilting the sides back and forth. now if this still did not work, get your old cartridge, shake it too and try to use it. if it prints sparkles (like its supposed to since it is empty) bring the new cartridge back to the store for replacement...

if you have other concerns, lemme know

Posted on Sep 19, 2008

anujbhatt
  • 66 Answers

SOURCE: how to print borderless 5 x 7 pictures using an HP

Open printers window, right click on the psc printer icon , select printing preferences, click on paper\quality tab, select the paper size as 5x7, check the option as borderless printing and click on apply and then oK...
Try to print ,,,

Posted on Dec 11, 2009

bob_computer
  • 3153 Answers

SOURCE: Just replaced the black ink cartridge on the HP

Take a look at my tip on cartridges it may save you a lot of time and money

http://www.fixya.com/support/r3845491-ink_cartridge


OR

Read on and see if any applies to you.
Check that you removed the protective tape. some cartridges have two of these pieces of tape one over the head and possibly on on the contacts to the printer.

If you recently re-filled or had the cartridge refilled or even bought one of the many cheaper replacement cartridges you should read on

Most modern cartridges have an ink level chip built on to them.
Should the level drop below 25% then most of these chips lock up and will not reset.

Re-filling them will have no effect

If you are lucky you should be able to find either a
chip resetter around on the INTERNET or maybe even local

OR

Even better empty cartridges that
never need to be reset.
The second option is my preference

I realise these are not for your specific printer but there are others listed on both those sites as well.

cheaper cartridge problems have been on the rise recently and that is for ALL makes of printer.
If you try to clean the contacts be VERY careful cleaning contacts and ONLY use isopropynol on a lint free bud or cloth.
Also be very gentle.

I have seen the contacts cleaned and cartridges ruined with other methods of cleaning.
Rubbing too hard can also cause a badly set chip to move making it inoprable.

I dont like full prices replacements either which is why I always provide the links
I usually reccomend that people take back any cartridge that does not work right from the get-go.

I dont know of anyone who has had a problem doing that be it a shop refill or otherwise.

No matter if I paid $1 or $100 for a cartrdige I would still expect it to work
Hope this gives you the information you need

Bob

EXMod

It would be very decent of you to consider the quality of our experts answers and judge them accordingly as you pass through FixYa.

Thank you

Posted on Jan 14, 2010

  • 1 Answer

SOURCE: I have hp 1280 A3 Inkjet printer . When I give pri...

I have hp 1280 A3 Inkjet printer . When I give print it pick up paper and out the blank paper without printing . a4 printing is ok. But A3 Is majour problem

Posted on Jun 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Printer is only printing 1/3 of a page at a time


Try updating drivers. Go to the HP website, locate Downloads (or something like that), and follow the prompts.

May 30, 2012 | HP PSC 1209 All-in-One InkJet Printer

1 Answer

A sheet of paper had remain in the cylinder


  1. Remove the rear cleanout from the printer.
  2. Gently remove any jammed paper or bits of paper.
  3. Close the HP Paper Feed Cleaning Kit software on the computer.
  4. Load plain paper in the printer paper tray.
  5. Press the Power button to turn the printer off.
  6. Press the Power button to turn the printer on.
  7. Try printing again. If the printer still does not pick up paper or if a paper jam occurs again, service the printer.


Other solutions customers found helpful » HP Paper Feed Cleaning Kit -- Clean the Paper Feed Rollers with the HP Paper Feed Cleaning Kit in Windows XP and 2000 » HP Deskjet, Photosmart, and PSC All-in-Ones -- 'Out of Paper' Error Message and the Printer Does Not Pick Up or Feed Paper » HP PSC 1600 and 2350 All-in-One Series Printers -- 'Paper jam: Press OK to continue' Message Displays on the All-in-One

Dec 15, 2010 | HP PSC 1610 All-In-One InkJet Printer

1 Answer

Problems with printing photos. Hp Psc 1410


check the configurations again, if the problem were still there, try with other cartridges.

Aug 13, 2009 | HP PSC 1410 All-In-One InkJet Printer

1 Answer

I have an HP printer scanner 1310 series. Have trouble with printing. It will run about 3 blank pages through before it will print. Then it will run a page part way through so have to open back to get it...


Hi Audrey-

There are many things that will effect how your printer handles paper. The most overlooked being the size of the document or image to be printed. If the image or text bleeds over the edges (left, right, top, bottom) of the document, several sheets can be ejected before the "visible" printing takes place. Often those first few pages look blank, but actually are the outer edges of your picture or text. If you are printing a large picture or large text document, this may be your situation. Try printing a document with just a few words on it (like a small email) as a test.

The second most common culprit is dusty, dirty feed rollers in the printer. Consult your HP 1310 series manual for instructions on cleaning the feed rollers, or consult this general cleaning article on HP.com. HP PSC 1310 All-in-One Printer series cleaning

The type of paper can also effect how many sheets are pulled into the rollers. Is the paper new?, Thick?, Very thin?, or is it the same ol' printer paper you've always used? Either way, remove the stack of paper from the feed tray, "fluff" it by fanning it (like flipping through a book very quickly, or the way Superman counts a stack of money!) and replace. Print a test page.

Let me know if this helps!

Dec 29, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Can print A4 but not photo paper


It looks like you have a problem with the pick up roller....try removing the roller and washing it with water dry properly and insert it back to place ..this is temporary fix.....and mite not work 2..u need to replace this roller....if it continues to trouble you

Oct 31, 2008 | HP PSC 1410 All-In-One InkJet Printer

1 Answer

Problem with hp psc 1410


My printer will scan and print , but it wont print from the computer, I need to activate it but I lost my disk.

Jan 17, 2008 | HP PSC 1410 All-In-One InkJet Printer

1 Answer

Won't pick up paper and won't print


Did you have any recent jams that may have left a bit of paper in the printer?

Apr 24, 2007 | HP PSC 2410 All-In-One InkJet Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...