Question about HP Envy 4t Sleekbook Ultrabook Laptop. Core I3, 4gb, 500gb, Beats Audio, Bt3

2 Answers

Windows keeps reloading

Once PC turned on and password entered to log onto Windows, as soon as I try to access a program the desktop opens and then the circle timer pops up. it cycles over and over and nothing happens. THe screen just goes from the background of the desktop to the purple background of the windows app screen. It continuously flips back and forth. Task manager can open but after waiting forever it seems. Help !

Posted by Anonymous on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

If you have a windows os disk, install it atrun it from bootloader, then repair os

Posted on Aug 02, 2017

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 854 Answers

Hello Anon.
4T-nnnnn (what is the nnnnn ) they make
there are 11 note books in the series. which one?>
https://support.hp.com/us-en/products/laptops/envy-notebooks
toss coin land on dash 1100

what windows, tell the helper what windows version W10?
the circle mans the OS is corrupted. (infected)
see this page 1100
https://support.hp.com/us-en/product/hp-envy-ultrabook-4-1100/5296027/product-info

all you need is there, at HP, we are not HP, we are lame chat box.
there are many causes here, (virus tops lists)
It can be many things,, bad OS corruption or bad hardware
like this.
first:
1: take the main battery out and test it like that on AC power pack.
but the steps are complex in this integrated PC, battery that I avoid.
so this is show stopper from non tech, no?
page 43 stated here clear as day.
http://h10032.www1.hp.com/ctg/Manual/c03599931

2: the HDD can be bad, we run Linix DISK tests on it,
smart tests and full scans on it from Linux
the BIOS hdd tests is first, if fails it bad HDD. BIOS HDD tests
are rudimentary so if passes this test means zxero to me.

4: if power packs good, battery inside not shorted
and HDD test work
Hit F11 and do a restore

power off
power key pushed, hit F11 like woody wood peckker.
HP recovery mode LAUNCHES.
hp tells you what to do there, on same topic there.

eg. do a last restore point,?
do startup repair
back up now?
do the full install.?
or get the PC fixed?

Posted on Aug 02, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

djnick989
  • 1067 Answers

SOURCE: HP Pavilion dv6000

video driver maby what about redoing windows formatt it all

Posted on Jan 18, 2008

jemthy
  • 176 Answers

SOURCE: Desktop and Task bar disappearing

You computer is infected by the spyware virus try to run in the safemode and download and install spyware doctor of pctools also the registry mechanic this two utilities is very helpful in term of spyware virus. But sometime if your computer infected by the UST.AVI virus you cannot install any program even the anti virus. The virus automatically close any program you install to prevent the anti virus to install in the system. If this happen the only way to salvage the files is reinstall the windows in the other directory then after you finished install windows. You can copy now the the files in the old directory copy of the windows your needed files. and delete the old windows directory permanently.

Posted on Apr 24, 2008

  • 12 Answers

SOURCE: HELP!! PLEAse!!!!!

What you have done is put a BIOS password on your system, all you have to do is enter the password you typed after you hit F10 the first time when the system boots up. if the password does not work try hitting the caps lock key and entering the password again.

Posted on May 07, 2008

  • 86 Answers

SOURCE: task-bar & start-menu disappeared

Just do as I say - it will be ok and sort itself out - the screen will not go blank and the drivers are still installed in Windows and will just be reinstalled, thus associating themselves with the card again. No internet connection is needed and the drivers will be reinstalled automatically without the need for user input.

To gain access to that which is 'off screen' push the mouse against the edge of the screen and it should move the display into view

Posted on Dec 12, 2008

Murphybanton
  • 2004 Answers

SOURCE: HP Pavilion Vista problem

Please I will warn you never to format an HP system. It will never be the same again. Still us e system restore be starting the system up and holding down the F11 key. Remember to select backup files and documents because it will restore your system to factory settings.

This will definately work.

Rate this please.

onifadeadewunmi@hotmail.com

Posted on Mar 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I CAN NOT GET ON LINE ,MY id WONT WORK NOT MY PASS .


With the information you have provided it is hard to say what the issue might be. Could you please be more specific in what is happening? Is it password related to the PC? Is it sluggish performance? Is it missing program links? is it internet access?

Mar 25, 2014 | E-Machines eMachines Desktop PC

1 Answer

Assign ip address


Which operating system and type of router ?
Use dos comand
The administrator account on a Windows machine is the main, root user name that gives full access to the machine.

Administrators should change this password frequently to avoid unauthorized access to the domain or desktop machine.

This can be done in the Windows Control Panel, or use the "net user" command in the Windows DOS prompt.

Log in to the machine using the administrator username and password.
You can also use an account that has administrator privileges on the domain or desktop computer.


Click the Windows "Start" button and select "Run" or "Start Search" (depending on your version of Windows).
In the text box displayed, enter "cmd" and press the "OK" button.
This opens the command prompt window.

Type "net user administrator <new password>" into the command prompt.
Replace "<new password>" with the password you want to set.

Enter the password again for confirmation.
Once you enter it again, the administrator password has been changed.

Test the new password by rebooting the machine and logging in with the new administrator password.

Nov 29, 2013 | Computers & Internet

1 Answer

I had forgotton my administrator password & log-on using Guest account currently. All the program run needed to passby UAC (User Account Control) permisson. How could i reset it without permisson to...


Hi cheewee6...
Try this solution to your problem


Start your computer
1. Keep pressing "F8" as the laptop computer starts.
This will start the computer in Safe Mode.
2. When the window "Advanced Boot Options" opens, choose "Safe Mode" with arrow key and confim by pressing the Enter key, then PC enters the Safe Mode.
3. Once you are in the Safe mode Click "Administrator" on the Windows login screen.
Take note that you have set the Administrator password before, you need to input the changed password instead of leaving "Password" field blank.
4. Then click Start > Control Panel > User Accounts > Select the account that is locked and change the password.
5. Restart laptop and login into the account you just created using your new password.
Please take time to rate me thumbs up

Sep 10, 2011 | Dell Vostro 200 PC Desktop

1 Answer

Hello peeps. I had forgotton my administrator password & log-on using Guest account currently. All the program run needed to passby UAC (User Account Control) permisson. How could i reset it...


Hi cheewee6...
Try this solution to your problem.
Start your computer
1. Keep pressing "F1,F2 or F8" as the laptop computer starts.(Depending on your computer)
This will start the computer in Safe Mode.
2. When the window "Advanced Boot Options" opens, choose "Safe Mode" with arrow key and confim by pressing the Enter key, then PC enters the Safe Mode.
3. Once you are in the Safe mode Click "Administrator" on the Windows login screen.
Take note that you have set the Administrator password before, you need to input the changed password instead of leaving "Password" field blank.
4. Then click Start > Control Panel > User Accounts > Select the account that is locked and change the password.
5. Restart laptop and login into the account you just created using your new password.
Please take time to rate me thumbs up

Sep 10, 2011 | Dell Vostro 200 PC Desktop

2 Answers

I forgot my password


Hi,

If you have windows xp then here are the steps that you need to perform.

1)Turn the computer off and then as soon as you press the power button to turn it on start tapping the F8 key repeatedly.Tapp the key until you get a blak screen that says advance boot menu options.
2)Select Safe mode and then enter
3)When you get the log on screen select administrator and then hit enter.
4)Once ur ont he desktop go to control panel???user account and then select the account that you log on to and click on change password.
5)Enter the new password and then restart the computer
6)Log in using the new password.

If it is windows vista or windows 7 then the only thing that can be done is a recovery that takes the computer back to its original factory settings .

All the best........

Aug 14, 2010 | Computers & Internet

3 Answers

I whent to control panel changed password it opened the windows but only parts i can use.i can not download or go to programs.it keeps asking for administrator.can only open this


hi ,
Obviously you have logged on as a guest user which restrict you from entering other files in the PC .
go back to the user icon on the control panel and log on as the administrator and you will be able to access all files .

Oct 03, 2009 | E-Machines eMachines Desktop PC

7 Answers

Lost my windows xp password , I can't log on.


1. Place your Windows XP CD in your cd-rom and start your computer (it’s assumed here that your XP CD is bootable – as it should be - and that you have your bios set to boot from CD)
2. Keep your eye on the screen messages for booting to your cd Typically, it will be “Press any key to boot from cd”
3. Once you get in, the first screen will indicate that Setup is inspecting your system and loading files.

4. When you get to the Welcome to Setup screen, press ENTER to Setup Windows now
5. The Licensing Agreement comes next - Press F8 to accept it.
6. The next screen is the Setup screen which gives you the option to do a Repair.

It should read something like “If one of the following Windows XP installations is damaged, Setup can try to repair it”
Use the up and down arrow keys to select your XP installation (if you only have one, it should already be selected) and press R to begin the Repair process.
7. Let the Repair run. Setup will now check your disks and then start copying files which can take several minutes.
8. Shortly after the Copying Files stage, you will be required to reboot. (this will happen automatically – you will see a progress bar stating “Your computer will reboot in 15 seconds”
9. During the reboot, do not make the mistake of “pressing any key” to boot from the CD again! Setup will resume automatically with the standard billboard screens and you will notice Installing Windows is highlighted.
10. Keep your eye on the lower left hand side of the screen and when you see the Installing Devices progress bar, press SHIFT + F10. This is the security hole! A command console will now open up giving you the potential for wide access to your system.
11. At the prompt, type NUSRMGR.CPL and press Enter. Voila! You have just gained graphical access to your User Accounts in the Control Panel.
12. Now simply pick the account you need to change and remove or change your password as you prefer. If you want to log on without having to enter your new password, you can type control userpasswords2 at the prompt and choose to log on without being asked for password. After you’ve made your changes close the windows, exit the command box and continue on with the Repair (have your Product key handy).
13. Once the Repair is done, you will be able to log on with your new password (or without a password if you chose not to use one or if you chose not to be asked for a password). Your programs and personalized settings should remain intact.

Sep 23, 2009 | Gateway GT5220 PC Desktop

1 Answer

I can't receive e-mail. A log in message keeps popping up each time I open my e-mail. My user name and password is there and I have to cancel the box to get to my messages. This time I got a message:...


What is your email provider (like hotmail, yahoo, etc), and what program are you using to get mail? (windows live, outlook, outlook express?)
Have you tried accessing your mailbox directly from a browser window and logging into the provider website? You'll be able to check your password access that way...
Give us some more details and we might be able to answer better...
If you're using outlook, I think I fixed that issue once but it took some searching, and reappeared after awhile...you may have a corrupt user profile or mail profile and need to make a new one...
Let us know....

Aug 11, 2009 | Microsoft Windows XP Home Edition English...

3 Answers

Forgotten password


when you press the power button keep pressing F8 and you should get a menu , select safe mode and let it load.. once it has loaded select the administrator account and it should log in ...( providing you havn't set a password) then just go to user accounts and change your password

May 29, 2009 | E-Machines eMachines T3830 PC Desktop

2 Answers

I have forgotten my windows user log in password for my 2004 HP Laptop. How can I bypass this to access my information on desktop. If not and I have another windows program to install how do I go about...


hi
when u reach the logon user press
CTRL+ALT+DEL+DEL
TYPE ADMINISTRATOR THEN PRESS ENTER IF U LOGIN THEN CREATE NEW USER AND THEN ENTER THIS USER.THEN REMOVE PREVIOUS USER PASSWORD OR CREATE NEW ONE.

Mar 27, 2008 | Computers & Internet

Not finding what you are looking for?
HP Envy 4t Sleekbook Ultrabook Laptop. Core I3, 4gb, 500gb, Beats Audio, Bt3 Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...