Question about Kingston Etherx Pro-series Ethernet Hub Kne24tp/rs

Open Question

Red light on BNC

What does it mean

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Th-42pwd8uk has green light and sound and no picture


Why would you use composite video? It's very low end., subject to interference. Change to HDMI.

Mar 30, 2014 | Panasonic TH-42PC77U TV

2 Answers

How do I hook up my little DVD player to my tv?? The DVD player only has red, yellow, and white cords,, where to I plug it in at on the back of the tv and which setting.


New Samsung HDTVs use the GREEN RCA input for the yellow RCA video cable, plug it in there. Select the AV input on the TV. For sound, connect white RCA cable to white RCA input on TV.

Aug 21, 2011 | Samsung 50 in. Plasma TV

1 Answer

Need an replacement antenna for my radio shack pro-508 scanner. Radio shack does not carry them anymore


Hi.

Check on eBay. You need a standard BNC connector antenna for this scanner. Radio Shack scanners are made by Uniden so a Uniden BNC antenna will fit your unit.

Here's a link for an antenna on eBay:

http://cgi.ebay.com/UNIDEN-DESKTOP-SCANNER-ANTENNA-BNC-SCAN-3-/220734104369?pt=LH_DefaultDomain_0&hash=item3364c72331

Feb 08, 2011 | Radio Shack Pro-2018 Scanner

1 Answer

In a move my NEC MultiSync 5FG monitor got disconnected from its BNC cable (5 BNC). Now I don't know which leads connects to which ports. Can anyone help?


The cable should be labeled with R (RED video signal), G (GREEN video signal), B (BLUE video signal), V (Vertical Sync signal), and H (Horizontal Sync signal), so you just have to match the plug to the sockets.
I hope it is clear explanations.

Dec 31, 2010 | NEC MultiSync 5FG (White) 17" CRT Monitor

1 Answer

I just got apple tv and don't know if I can hook it up to my gm-v42ug flatscreen tv Apple TV takes HDMI but the tv doesn't have an hdmi input that I can see. Can I hook it up? If so, how/ Thank you!


the tv has as follows. Use the bnc conectors to hook it to the RGB & R and L Audio. or reg Comp input ( Yellow ,Red White.) can get adaptors at the Shack. Inputs
Composite BNC Back Composite RCA Back Component 3 BNCs Back RGB 5 BNCs Back RGB 15-Pin Dsub Back RS232 DB-9 Dsub Back



Dec 25, 2010 | JVC GM-V42UG 42 in. Plasma EDTV

1 Answer

Dome camra wire connection with bnc


Preparation
Before installing your RCA camera scout the area and confirm that you will be able to run the cable from your surveillance digital video recorder (SDVR) to your camera. You may want to use RG59 Siamese cable, which is a single cable system with three wires: a coaxial cable for the video and a positive and negative wire to provide power to the camera. If you are installing your camera outside, place it at least 10 feet high to minimize tampering, or put your camera in a dome or other protective housing.
Coax Cable
BNC connector
BNC connectors and cable image by Albert Lozano from Fotolia.com
BNC connector
If you use Siamese cable to wire your RCA camera, you will run the cable first, and then install a BNC (bayonet Neill-Concelman--named for the inventors) connector on each end of the cable. BNC connectors vary by manufacture; install the BNC connectors according to the connector instructions. To get a general overview of the process, see the Resources section for a video on installing BNC connectors.
Power Wires
Plug with standard lamp-type cord
element electric power black image by Leonid Nyshko from Fotolia.com
Plug with standard lamp-type cord
Your camera came with a power supply with an integrated power wire; the power supply plugs into a standard wall outlet and the other end plugs into your camera. The cord is probably not long enough, in which case you will have to cut it and splice the Siamese in the middle to deliver power to your camera. The power supply wire is designed like a standard lamp cord and must be cut in half and split. One of the wires will be marked with a stripe, a series of dashes, a rib on the insulator or some other marking (just like a lamp cord). The marking indicates that this is the positive wire. After cutting the supply cord, connect the portion with the camera plug on it to the Siamese cable at your camera and then connect the power supply portion to the other end of the Siamese cable near your SDVR. The positive (marked) power supply wire should be connected to the red Siamese wire and the other wire connected to the black Siamese wire. While many people use wire nuts to connect the wires, connecting the wires with a wire beanie (see Resources) will provide a higher quality installation.
Plug-and-Play
Plug-and-play cables make it easier for homeowners to install their cameras. These cables incorporate all three wires into one cable system and come with connectors preinstalled so that you will not have to install connectors or cut wires. This is slightly more costly than assembling your own cable, but it will save you time and you will not have to purchase special tools to install the connectors. Run your plug-and-play cable and connect it by following the instructions which come with your cable. See the Resources section for a video on installing plug-and-play cables.

Dec 16, 2010 | Dome (8) Cctv Dome Color Ccd Night Vision...

1 Answer

Need wireing map for cv67 i have four wires red black yellow white whats what?


Only red(+) Black(-) and Yellow (Video) is used if you just cut off that mini din plug end and were looking at the wires coming from camera. I bought some standard power and bnc pigtails from DX.com and replaced that mini din cable they use to make their connections to a standard cctv type.
Un-screw the main lens cover and you will see a screw ring and by taking a verner caliper to catch on both sides you can unscrew camera unit ring and when you look inside the only wires you need to solder to new pigtail is red/black/yellow each to their own color.
Pushing the pigtail thru may be a little pain but with a little spit on wire makes it a lot easy.
Re-assemble in reverse and you should be up and running.
Camera runs on 12 volt with center of plug positive and video bnc center is video.
Hope this helps.

Sep 28, 2009 | SVAT CV67 Hi-Res Outdoor Weatherproof...

1 Answer

Can't find satellites


The internal antenna BNC connection (the little steel bayonet that the secures the antenna or extender cable) is a common failure on these units. The threaded retaining ring on the outside of the antenna BNC comes loose when installing/removing the antenna connection, and eventually the BNC rotates and the solder joint inside fails. This happened on mine recently, if you are handy fixing small mechanical parts and a good solderer it is pretty  easy to fix. Remove the batteries, remove all six outer case screws (but not the one with the oval metal plate) and gently pull the housing apart. Check the solder connection of the coax wire to the BNC pin & shield. If it's broken and the BNC is loose in the GPS case, tighten the outer BNC retaining ring VERY tight, add a drop of thin super glue (Hot Stuff or Permabond CyA, etc) to keep the ring/BNC/case mated, then repair the coax solder  connection. Replace all the screws and test it outside. If it's an aviation GPS you would of course have this done by an FAA licensed avionics specialist. Wink wink.

Jun 14, 2009 | Garmin GPS III

1 Answer

Connecting component video YPbPr to TV with BNC port for RGBHV


No, this will not work. Picture will roll vertically. Originally they intended for HDTV to be red,green, blue, & Horizontal, Vertical sync. That changed after the first generation mitsubishi's.
In the service menu you can change the settings for the HDTV Input. Try that first by "Hitting menu button followed by 1259" or menu 1257. Let me know how that works for you, If you need a different code for service menu...contact me again and i will look it up for you. But the answer to your question is you can make it work or you can purchase a 300.00 box that will allow you to switch to that input thru..mitsubishi.tv.com
Good luck and keep me posted. GURU JAY

Dec 08, 2007 | Mitsubishi VS-50605 50" Rear Projection...

Not finding what you are looking for?
Kingston Etherx Pro-series Ethernet Hub Kne24tp/rs Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kingston Computers & Internet Experts

Cleverer2

Level 2 Expert

298 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you a Kingston Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...