Question about GE Profile Harmony DPGT750EC Electric Dryer

1 Answer

Dyer not getting hot - GE Profile Harmony DPGT750EC Electric Dryer

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 50 Answers

You didnt give much info to go by but it could be several things, it could be the heating element, the thermostat that closes and sends power to the element, the vent in the back could be clogged and making the thermostat kick off and not letting the element stay on, It could also be the timer has went out. I would start by checking the vent and making sure it was clear and turn the breaker off and on to the dryer if one side of the breaker is not sending power you will only get 120 volts instead of 240 and the dryer will not work correct. for all the other you will need a multimeter and check one thing at a time to find the problem.

Posted on Apr 22, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My dyer gets hot then it gets e64 then my dyer stops


It could be clogged vent or faulty sensor or thermostat control board Best way is check for clogged vent or any rust or cracked components and use step by step deduction method for trouble shooting

Dec 08, 2013 | Kenmore Dryers

1 Answer

DRYER VENT PIPE HOT TO TOUCH


there could be a blockage which is preventing the hot air from escaping

Aug 07, 2012 | Whirlpool Dryers

1 Answer

Dyer only blows cold air


U may have a blown thermostat or bad heating element.

Nov 14, 2011 | Dryers

1 Answer

Stackable dyer gets too hot in the back and i cannot find a filter


Hi,
The cycling or operating thermostatis often the problem when a dryer runstoo hot, but there are also other things that can make it run hot also.

Here is a tip that I wrote that gives more details about why a clothes dryer will get too hot.

Clothes Dryergetting too hot

heatman101

Sep 05, 2011 | Samsung DV316LGW Dryer

1 Answer

I have a Kenmore gas dyer that has developed a burning smell


check vent line,either check outside to see if flapper is blowing open or disconnect vent line from back of dryer and see if it helps.if not there are two thermostats Number: 660036 Substitution: 279048 and
Number: 3387134 ,this one is on blower wheel housing and the other is in the back,take back wall off and you'll see it on right hand side on heater vent duct

Nov 03, 2009 | Kenmore Dryers

1 Answer

Dyer not working


Most likely a faulty heating element or a blown thermal fuse. Both components can be tested using a multimeter. Test for continuity. A lack of resistance indicates a bad component. The thermal fuse located just inside the rear of the dryer and is usually mounted on the exhaust duct. It is about one inch long. If it has no continuity, the thermal fuse is blown. Hope this helped and best wishes.

Aug 07, 2009 | Amana ALG331RAW Gas Dryer

1 Answer

My dyer does not get hot.


change your high temp thermostat,remove back panel and it's on your right bottom of box-mike

Jul 16, 2009 | Kenmore 63942 Dryer

1 Answer

Dyer won't get hot,


if it is heating at all you can check your vent going out to see if its stopped up

Apr 24, 2009 | Washing Machines

Not finding what you are looking for?
GE Profile Harmony DPGT750EC Electric Dryer Logo

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dryers Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

JP Services
JP Services

Level 2 Expert

310 Answers

Cindy Wells

Level 3 Expert

5124 Answers

Are you a GE Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...