Pull apart dc 22 - Dyson DC22 Motorhead Canister Vacuum Bagless Cyclonic Vacuum

Here is the Service Guide. Plumbing Guide is on Page 22.

https://evacuumstore.com/images/proheat-2x-service-guide.pdf

..

If it is like my dyson big ball type model the switch wears out . I had to pull it apart with special Torx screw drivers I got from dyson and then replaced the switch.

Try to raise the wand first. Then the hose will follow it as you pull it up.

With no suction you should check the venturis. They can become clogged if you suck up wet dust, wet cat litter, etc. You\'ll need a Torx Screwdriver to get it apart. See where that gets you.

Yes. You can splice the cord together. But when you pull it it will want to separate, so when you splice it add something ...like a wire tie..super glue it to both sides before you tape the splice. If it is the whole cord you will have to take it apart and make new stripped ends and just remove the old piece..put the new end on. This is not as easy as it sounds, I have done it but I am handy with tools and a little common sense.A handy man can fix it for you.

ive had the dyson apart and cant find a blockage, the motor sounds ok.

Hi Garry,

Thank you for your question. We would like to provide further assistance but it would be difficult to provide all of the information in this space. We would appreciate the opportunity to discuss this over the phone in greater detail.
Please call us at 1-866-693-9766 (US), 0800 298 0298 (UK) or 1 800 239 766 (AU). We look forward to speaking with you.
Best wishes,
Jessica

Hi Terry,

You can download user guides for our machines from our website - please visit www.dyson.com and click 'Support', then select your machine from the list. You can also order genuine Dyson spare parts for your machine directly from our online store.

Please note, HWC-22 is not a Dyson model number. Our vacuum cleaners are given model numbers beginning DC--, followed by two numbers. You'll be able to find this printed prominently on your machine.

I hope this helps - if you'd like any further assistance or advice, please give our customer Helpline a call on 0800 298 0298 (UK), or 1-866-693-9766 (US).

Best wishes,

Jack
Dyson Online Customer Support
http://www.dyson.com

Hi there, there are only a couple of things that make the roller not work.
1. Something is wound around the brush and it is jammed
2. The brush roller bearings (in the brush ends) are full of **** or siezed
3. One of your belts is worn or broken.
4. The clutch is faulty.
I have made a video showing how to pull apart the dc07 at this area. If you watch the video there is good tips that will help fix your vacuum.
If you need parts then have a look at Nelson Vacuums or VacuumSpot

If this is a helpful guide please take just a moment to leave me a review, thumbs up or testimonial.

Happy Vacuuming :)

You can download a manual from the dyson website